B82724B2501N001 Datasheet, PDF (3/7 Pages) EPCOS – Power line chokes

Power line chokes
Current-compensated ring core double chokes
Dimensional drawing and pin configuration
3 ^_0.4
2
3
2
3
B82724B
4+1
25 ^_0.3
1 _20±0.2 4
32.6 max.
1
4
IND0260-Z
Tolerances to ISO 2768-C unless otherwise noted.
Dimensions in mm
Technical data and measuring conditions
Rated voltage V_R
Test voltage V_test
Rated temperature T_R
Rated current I_R
Rated inductance L_R
Inductance tolerance
Inductance decrease ΔL/L₀
Stray inductance L_stray,typ
DC resistance R_typ
Solderability (lead-free)
Resistance to soldering heat
(wave soldering)
Climatic category
Storage conditions (packaged)
Weight
Approvals
250 V AC (50/60 Hz)
1500 V AC, 2 s (line/line)
40 °C / 50 °C / 60 °C
Referred to 50 Hz and rated temperature
Measured with Agilent 4284A at 10 kHz, 0.1 mA, 20 °C
Inductance is specified per winding.
±30% at 20 °C
< 10% at DC magnetic bias with I_R, 20 °C
Measured with Agilent 4284A at 10 kHz, 5 mA, 20 °C,
typical values
Measured at 20 °C, typical values, specified per winding
Sn96.5Ag3.0Cu0.5: (245 ±5) °C, (3 ±0.3) s
Wetting of soldering area ≥ 95%
(to IEC 60068-2-20, test Ta)
(260 ±5) °C, (10 ±1) s
(to IEC 60068-2-20, test Tb)
40/125/56 (to IEC 60068-1)
–25 °C … +40 °C, ≤ 75% RH
Approx. 35 g … 46 g
EN 60938-2, UL 1283
Please read Cautions and warnings and
Important notes at the end of this document.
3 10/08