B44066T0050E690 Datasheet, PDF (3/6 Pages) EPCOS – Thyristor module TSM-HV50

Thyristor module for dynamic PFC
Accessories for power factor correction
Preliminary data
B44066T0050E690
Thyristor module TSM-HV50
Technical data
Dimensions
Weight
Rated voltage
Auxiliary supply
157 x 200 x 195 mm (w x h x d)
5 kg
Max. 690 V
230 V AC
Frequency
50/60 Hz
Switching capability
50 A (max. 60 kvar at 690 V)
Activation
Switching time
10…24 V DC (approx. 20 mA) via terminal clamp,
internally electrically isolated
Approx. 5 ms
Reset time
Display
Power circuit
Power dissipation
Fuses (mandatory for protection of components)
Ambient operating temperature at nominal load
Depending on degree of detuning and dimension of
discharge resistor
Status LED per phase
LED triggering signal
Direct connection 4 pole via busbar (cable lug 25 mm²,
D = 8 mm), connection from the bottom
P_D (in W) = 3.0 x I (in A); at 690 V/50 kvar approx.
125 W thermal
3 x electronic fuse „superfast“ (NH00 AC 690)
50/60 kvar: max.125 A (SIBA Art. No.: 20 209 20-125)
25 kvar: max. 63 A (SIBA Art. No.: 20 209 20- 63)
–10 °C … +55 °C
FK PC PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 6
August 2006