B43693_12 Datasheet, PDF (3/14 Pages) EPCOS – Aluminum electrolytic capacitors

B43693, B43793
High voltage  125 °C
Specifications and characteristics in brief
Rated voltage V_R
Surge voltage V_S
Rated capacitance C_R
Capacitance tolerance
Leakage current I_leak
(5 min, 20 °C)
250 V DC
1.15  V_R
22 ... 130 µF
10/+30%  Q
Self-inductance ESL¹⁾ Diameter d (mm)
14 18 21
Terminals
Length l (mm) Approx. ESL (nH)
Useful life
axial
30
39
49
soldering star 30
39
49
24 34 

38 45


50
7
10 

11 13


14
Requirements:
125 °C; V_R; I_AC,R
105 °C; V_R; I_AC,R
85 °C; V_R; I_AC,max
40 °C; V_R; 2  I_AC,R
> 2500 h
> 10000 h
> 4000 h
> 250000 h
∆C/C
ESR
I_leak
≤ ±30% of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Voltage endurance test
Post test requirements:
105 °C; V_R
Vibration resistance test
5000 h
∆C/C ≤ ±10% of initial value
ESR ≤ 1.3% of initial specified limit
I_leak ≤ initial specified limit
To IEC 60068-2-6, test Fc:
Frequency range 10 Hz ... 2 kHz, displacement amplitude max.
1.5 mm, acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
Detail specification
Sectional specification
To IEC 60068-1:
40/125/56 (40 °C/+125 °C/56 days damp heat test)
Similar to CECC 30301-802
IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 14