|
B43541 Datasheet, PDF (3/17 Pages) EPCOS – Aluminum electrolytic capacitors | |||
|
◁ |
B43541
High ripple current, high voltage 85 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
Dissipation factor tan δ
(20 °C, 120 Hz)
550 ... 600 V DC
1.10 VR
47 ... 390 µF
±20% M
tan δ ⤠0.20
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL Approx. 20 nH
Useful life1)
Requirements:
85 °C; VR; IAC,R
40 °C; VR; 1.15 IAC,R
> 5000 h
> 100000 h
Voltage endurance test
âC/C ⤠±20% of initial value
tan δ ⤠2 times initial specified limit
Ileak
⤠initial specified limit
Post test requirements:
85 °C; VR
Vibration resistance
test
2000 h
âC/C ⤠±10% of initial value
tan δ ⤠1.3 times initial specified limit
Ileak
⤠initial specified limit
To IEC 60068-2-6, test Fc:
Frequency range 10 Hz ... 55 Hz, displacement amplitude 0.35 mm,
acceleration max. 5 g, duration 3 Ã 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Characteristics at low
temperature
Max. impedance ratio
at 100 Hz
VR
550 V ... 600 V
Z -25 °C / Z 20 °C
7
Z -40 °C / Z 20 °C
14
IEC climatic category
Detail specification
Sectional specification
To IEC 60068-1:
25/085/56 (25 °C/+85 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of 40 °C to
+85 °C but the impedance at 40 °C should be taken into consideration.
Similar to CECC 30301-811
IEC 60384-4
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 17
|
▷ |