X7R Datasheet, PDF (2/19 Pages) EPCOS – Multilayer ceramic capacitor

Multilayer ceramic capacitors
X7R
Chip
Features
■ High volumetric efficiency
■ Non-linear capacitance change
■ High insulation resistance
■ High pulse strength
Applications
■ Blocking and coupling
■ Decoupling
■ Interference suppression
Termination
■ For soldering: Nickel-barrier termination (Ni) for case sizes 0402 to 1210
Silver-palladium termination (AgPd) for case sizes 1812 and 2220
(capacitance values ≤1 μF)
■ For conductive adhesion: Silver-palladium termination (AgPd) for all case sizes on request
Options
■ Alternative capacitance tolerances available on request
Delivery mode
■ Cardboard and blister tape (blister tape for chip thickness ≥1.2 ±0.1 mm and case sizes ≥1210),
180-mm and 330-mm reel available
■ Bulk case for case sizes 0603 (16 V, 25 V, 50 V) and 0805 (50 V)
Electrical data
Temperature characteristic
Climatic category (IEC 60068-1)
Standard
Dielectric
Rated voltage¹⁾
Test voltage
Capacitance range²⁾ / E series
Max. relative capacitance change
Dissipation factor (limit value)
Insulation resistance³⁾ at + 25 °C
Insulation resistance³⁾ at +125 °C
Time constant³⁾ at + 25 °C
Time constant³⁾ at +125 °C
Operating temperature range
Ageing⁴⁾
V_R
V_test
C_R
ΔC/C
tan δ
R_ins
R_ins
τ
τ
T_op
X7R
55/125/56
EIA
Class 2
10, 16, 25, 50,100, 200, 500 VDC
2.5 · V_R/5 s
100 pF … 1 µF (E3/E6)
VDC
±15
%
<25 · 10^–3
<35 · 10^–3 for 16 V
>10⁵
MΩ
>10⁴
MΩ
>1000
s
>100
s
–55 … +125
°C
yes
1) Note: No operation on AC line.
3) For C_R >10 nF the time constant τ = C · R_ins is given.
2) See also HighCap series in data book or Internet 4) Refer to data book 2003 “General Techn. Inform.”, page 197.
Please read Cautions and warnings and
Important notes at the end of this docume²nt. ²
2 12/0505