S885 Datasheet, PDF (19/27 Pages) EPCOS – NTC thermistors for temperature measurement

Temperature measurement and compensation
Leaded NTC thermistors, lead spacing 5 mm
Solder joint profiles for silver/nickel/tin terminations
B57885S
S885
1.3.3 Recommended geometry of solder pads
Recommended maximum dimensions (mm)
Case size A
B
C
inch/mm
0402/1005 0.6
0.6
1.7
0603/1608 1.0
1.0
3.0
0805/2012 1.3
1.2
3.4
1206/3216 1.8
1.2
4.5
1.3.4 Notes
Iron soldering should be avoided, hot air methods are recommended for repair purposes.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 27