B72214P2131K101 Datasheet, PDF (11/15 Pages) EPCOS – Leaded varistors

Leaded varistors
AdvanceD-MP series
B72214P2**1K101
SIOV-S14K***E2K1
Characteristics
Resistance to
soldering heat
Bump
Flammability
Electric strength
Test methods/Description
Specifications
IEC 60068-2-20, test Tb, method 1A, 260 °C,
10 s:
Each lead shall be dipped into a solder bath
having a temperature of 260 ±5 °C to a point
2.0 to 2.5 mm from the body of the unit, be held
there for 10 ±1 s and then be stored at room
temperature and normal humidity for 1 to 2
hours. The change of V_v shall be measured and
the part shall be visually examined.
IEC 60068-2-29, test Eb
Pulse duration: 6 ms
Max. acceletration: 400 m/s²
Number of bumps: 4000
Pulse:
half sine
IEC 60695-2-2 (needle flame test)
Severity: vertical 10 s
CECC 42 000, test 4.7
Metal balls method, 2500 V_RMS, 60 s
The varistor is placed in a container holding 1.6
±0.2 mm diameter metal balls such that only the
terminations of the varistor are protruding.
The specified voltage shall be applied between
both terminals of the specimen connected
together and the electrode inserted between the
metal balls.
|∆V/V (1 mA)| ≤5%
No visible damage
|∆V/V (1 mA)| ≤5%
No visible damage
5 s maximum
No breakdown
PPD PD VAR PD
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 15
2010-02-02