B72207S0600S212 Datasheet, PDF (1/3 Pages) EPCOS – Leaded Varistors Telecom Series

Leaded Varistors
Telecom Series
Construction
I Round varistor element, leaded
I Coating: epoxy resin, flame-retardant to UL 94 V-0
I Terminals: tinned copper wire
Features
I Suitable for handling the surge current of the 10/700 ms pulse
to ITU-T and IEC 1000-4-5
I Suitable for handling the increased surge voltage according
to the directives of Germany’s telecom administration
I Matched to line conditions with or without superimposed ringing voltage
I Electrical SMD equivalents available
I PSpice models
Taping
I Only available on tape
Type designation
Detailed description of coding system on page 39, chapter “General Technical Information”
SIOV-S 07 S 60 A G S2
EPCOS metal oxide varistor
Design
Rated diameter of varistor disk
Special tolerance
of varistor voltage
Crimp style
Taping mode
Specifies special tolerance (A)
Max. AC operating voltage
General technical data
Climatic category
LCT
UCT
Damp heat, steady state
(93 % r.h., 40 °C)
Operating temperature
Storage temperature
Electric strength
Insulation resistance
Response time
40/85/56
– 40 °C
+ 85 °C
56 days
– 40 … + 85 °C
– 40 … + 125 °C
³ 2,5 kV_RMS
³ 10 MW
< 25 ns
in accordance with IEC 60068-1
in accordance with IEC 60068-2-3
in accordance with CECC 42 000
in accordance with CECC 42 000
in accordance with CECC 42 000
201 04/02