B72205S0110K111 Datasheet, PDF (1/16 Pages) EPCOS – Leaded Varistors Taping

Leaded Varistors
Taping
Taping (leaded varistors)
All leaded varistors are available on tape.
Exception: S10K510 … K680, S14K510 … K1000, S20K385 … K1000.
Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings
= 7,5 and 10 the taping mode is based on this standard.
The ordering tables on page 213 ff list disk types available on tape in detail, i. e. with complete type
designation and ordering code. Taping mode and, if relevant, crimp style and lead spacing are cod-
ed in the type designation. For types not listed please contact EPCOS. Upon request parts with lead
spacing = 5 mm are available in Ammopack too.
Designation system for taping mode
Type designation
bulk
default = no extra
designation
Taped, reel type
G
G2
G3 see page 208
G4
G5
Taped, Ammopack
GA _{see page 209}
G2A
Crimp style
(if relevant)
S
S2
S3 see page 212
S4
S5
Lead spacing
(if relevant)
R5 Lead spacing
R7 differs from
standard
version
Example SIOV-S10K250GS3R5
SIOV-S10K250
G
S3
R5
Taped
Reel type I
Seating plane height
H₀ =16
Example SIOV-S07K60G2AS2
SIOV-S07K60
G2A
Crimp style 3
S2
Lead spacing 5,0
(differs from LS 7,5
of standard version
S10K250)
—
Taped
Crimp style 2
—
Seating plane height
H₀ =18
Ammopack
206 04/02