|
EM47EM1688SBB_15 Datasheet, PDF (2/39 Pages) Eorex Corporation – Double DATA RATE 3 SDRAM | |||
|
◁ |
EM47EM1688SBB
4Gb (32MÃ8BankÃ16) Double DATA RATE 3 SDRAM
Features
⢠JEDEC Standard VDD/VDDQ = 1.5V±0.075V.
⢠All inputs and outputs are compatible with SSTL_15
interface.
⢠Fully differential clock inputs (CK, /CK) operation.
⢠Eight Banks
⢠Posted CAS by programmable additive latency
⢠Bust length: 4 with Burst Chop (BC) and 8.
⢠CAS Write Latency (CWL): 5,6,7,8
⢠CAS Latency (CL): 6,7,8,9,10,11
⢠Write Latency (WL) =Read Latency (RL) -1.
⢠Bi-directional Differential Data Strobe (DQS).
⢠Data inputs on DQS centers when write.
⢠Data outputs on DQS, /DQS edges when read.
⢠On chip DLL align DQ, DQS and /DQS transition
with CK transition.
⢠DM mask write data-in at the both rising and falling
edges of the data strobe.
⢠Sequential & Interleaved Burst type available both
for 8 & 4 with BC.
⢠Multi Purpose Register (MPR) for pre-defined
pattern read out
⢠On Die Termination (ODT) options: Synchronous
ODT, Dynamic ODT, and Asynchronous ODT
⢠Auto Refresh and Self Refresh
⢠8,192 Refresh Cycles / 64ms
⢠RoHS Compliance
⢠Driver Strength:RZQ/7, RZQ/6 (RZQ=240Ω)
⢠High Temperature Self-Refresh rate enable
⢠ZQ calibration for DQ drive and ODT
⢠RESET pin for initialization and reset function
Description
The EM47EM1688SBB is a high speed Double Date
Rate 3 (DDR3) Synchronous DRAM fabricated with
ultra high performance CMOS process containing 4G
bits which organized as 32Mbits x 8 banks by 16 bits.
This synchronous device achieves high speed
double-data-rate transfer rates of up to 1600
Mb/sec/pin (DDR3-1600) for general applications.
The chip is designed to comply with the following key
DDR3 SDRAM features: (1) posted CAS with
additive latency, (2) write latency = read latency -1,
(3) On Die Termination (4) programmable driver
strength data,(5) seamless BL4 access. All of the
control and address inputs are synchronized with a
pair of externally supplied differential clocks. Inputs
are latched at the cross point of differential clocks
(CK rising and /CK falling). All I/Os are synchronized
with a pair of bidirectional differential data strobes
(DQS and /DQS) in a source synchronous fashion.
The address bus is used to convey row, column and
bank address information in a /RAS and /CAS
multiplexing style. The 4Gb DDR3 devices operates
with a single power supply: 1.5V ± 0.075V VDD and
VDDQ. Available package: FBGA-96Ball (with 0.8mm
x 0.8mm ball pitch)
Oct. 2013
2/39
www.eorex.com
|
▷ |