P001-1-010X Datasheet, PDF (1/1 Pages) Ensign Corporation – POWER TRANSFORMER CAPTAIN CLASS

CAPTAIN CLASS - PRINTED CIRCUIT MOUNT, STANDARD PROFILE POWER TRANSFORMER
1. Electrical Specifications
A. Maximum Power: 1.1VA
B. Input Voltage and Frequency: 115V, 115/230V, 230V @ 50/60Hz
C. Voltage Regulation: 25% TYP @ Full Load to No Load
D. Temperature Rise: 20 C TYP
E. Insulation Resistance: > 1 MEG ohm
F. Hi-Pot: 2500Vrms 1 minute @ Pri to Sec
2500Vrms 1 minute @ Pri to Core
1500Vrms 1 minute @ Sec to Core
2. Marking: Ensign Corp, part number (see table), date code,
terminal numbers
3. Safety:
UL/cUL 5085-2 Recognized (File 47299)
UL 1446 Recognized Insulation System (File 95662)
UL/cUL 5085-3 Class 2 Recognized (File E43609), models marked (*)
Primary Schematics
Single Input
(Specify 115V,
120V, 230V or
240V)
Dual Input
(Specify
115/230V or
120/240V)
Secondary Schematics
Single
Output
Center-Tapped
Output
Dual
Output
115V
P001-1-010X*
P001-1-012X*
P001-1-016X*
P001-1-020X*
P001-1-024X
P001-1-028X
P001-1-036X
P001-1-048X
P001-1-056X
P001-1-120X
Part Number
115/230V
P001-2-010X*
P001-2-012X*
P001-2-016X*
P001-2-020X*
P001-2-024X
P001-2-028X
P001-2-036X
P001-2-048X
P001-2-056X
P001-2-120X
230V
P001-3-010X*
P001-3-012X*
P001-3-016X*
P001-3-020X*
P001-3-024X
P001-3-028X
P001-3-036X
P001-3-048X
P001-3-056X
P001-3-120X
Series Connection
10VCT @ 0.11A
12.6VCT @ 0.09A
16VCT @ 0.07A
20VCT @ 0.055A
24VCT @ 0.045A
28VCT @ 0.04A
36VCT @ 0.03A
48VCT @ 0.023A
56VCT @ 0.02A
120VCT @ 0.01A
Parallel Connection
5V @ 0.22A
6.3V @ 018A
8V @ 0.14A
10V @ 0.11A
12V @ 0.09A
14V @ 0.08A
18V @ 0.06A
24V @ 0.046A
28V @ 0.04A
60V @ 0.02A
CONTENTS OF THIS DRAWING ARE SUBJECT TO
CHANGE WITHOUT PRIOR NOTICE
POWER TRANSFORMER
CAPTAIN CLASS
Ensign Corporation
201 ENSIGN RD., BELLEVUE, IA 52031
P001-1-XXXX
P001-2-XXXX
P001-3-XXXX
Dim: Inches
Sheet 1 of 1
PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH ENSIGN RETAINS
THE EXCLUSIVE RIGHT OF DISSEMINATION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION
BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING