EM6603 Datasheet, PDF (1/39 Pages) EM Microelectronic - MARIN SA – Ultra Low Power Multi I/O Microcontroller

EM MICROELECTRONIC - MARIN SA
EM6603
Ultra Low Power Multi I/O Microcontroller
Features
• Low Power - typical 1.8µA active mode
- typical 0.35µA standby mode
- typical 0.1µA sleep mode
@ 1.5V, 32kHz, 25 °C
• Low Voltage - 1.2 to 3.6 V
• buzzer - three tone
• ROM - 2k × 16 (Mask Programmed)
• RAM - 96 × 4 (User Read/Write)
• 2 clocks per instruction cycle
• RISC architecture
• 4 software configurable 4-bit ports
• Up to 16 inputs (4 ports)
• Up to 12 outputs (3 ports)
• Serial (Output) Write buffer - SWB
• Voltage level detection
• Analogue watchdog
• Timer watchdog
• 8 bit timer / event counter
• Internal interrupt sources (timer, event
counter, prescaler, SWB)
• External interrupt sources (portA + portC)
Description
The EM6603 is an advanced single chip low cost,
mask programmed - CMOS 4-bit microcontroller. It
contains ROM, RAM, watchdog timer, oscillation
detection circuit, combined timer / event counter,
prescaler, voltage level detector and a number of
clock functions. Its low voltage and low power
operation make it the most suitable controller for
battery, stand alone and mobile equipment. The
EM66XX series is manufactured using EM
Microelectronic’s Advanced Low Power CMOS
Process.
Typical Applications
• sensor interfaces
• domestic appliances
• security systems
• bicycle computers
• automotive controls
• TV & audio remote controls
• measurement equipment
• R/F and IR. control
Figure 1.Architecture
Figure 2.Pin Configuration
Copyright  2002, EM Microelectronic-Marin SA
1
03/02 REV. G/439
www.emmicroelectronic.com