English
Language : 

EM4369 Datasheet, PDF (1/1 Pages) EM Microelectronic - MARIN SA – 512 bit Read/Write Contactless Identification Device
EM MICROELECTRONIC - MARIN SA
512 bit Read/Write
EM4369
Contactless Identification Device
Description
EM4369 is a CMOS integrated circuit intended for use in
electronic Read/Write RF transponders. It is functionaly
equivalent to the EM4269 and compatible with the
EM4469/4569 family. It is intended for direct connection of
coil to big bumps.
Comparing to EM4469/4569 family, the changes are the
following:
‰ New configuration bit co25 (configuration word), which
inverts data input to the encoder.
‰ Writing to Protection Word is modified.
The IC is powered by picking the energy from a continuous
125 kHz magnetic field via an external coil, which together
with the integrated capacitor form a resonant circuit. The IC
reads out data from its internal EEPROM memory and
sends it out by switching on and off a resistive load in
parallel to the coil.
Commands and EEPROM data updates can be executed
by 100% AM modulation of the 125 kHz magnetic field.
There are several data rate and data encoding options
available. The IC Options are stored in EEPROM
configuration word (word 4). Read and write access to
EEPROM can be protected by 32 bit password.
All EEPROM words can be write protected by setting lock
bits which transform them in read-only.
It contains a factory programmed and locked 32 bit UID
number, chip type and a customer code.
The on-chip resonant capacitor value is selected by metal
mask (three different options).
Features
‰ 512 bit EEPROM organized in 16 words of 32 bits
‰ 32 bit Password read and write protection
‰ 32 bit unique identification number (UID)
‰ 10 bit Customer code
‰ ISO 11784 / 11785 Standard Compliant
‰ Lock feature convert EEPROM words in read only
‰ Multi-purpose encoding (Manchester, bi-phase, Miller,
PSK and FSK)
‰ Multi-purpose data rate from 1 up to 32k bauds
‰ 100 to 150 kHz frequency range
‰ On-chip rectifier and voltage limiter
‰ No external supply buffer capacitor needed
‰ -40 to +85°C temperature range
‰ Very low Power consumption
‰ Big pads (200 μm x 400 μm) for direct connection of
coil using bumps
‰ Resonant capacitor with options 80pF, 250pF and
330pF integrated on chip
Applications
‰ Access Control
‰ Animal Identification according to ISO FDX-B
‰ Material Logistics
Typical Operating Configuration
C1
L
EM4369
C2
Fig. 1
Copyright © 2006, EM Microelectronic-Marin SA
Subject to change without notice
Rev. A, 06/06
Phone: +41.32.755-5111, Fax: +41.32.755-5403
www.emmicroelectronic.com
info@emmicroelectronic.com