LPS100-M Datasheet, PDF (3/3 Pages) Emerson Network Power – Medical and ITE safeties

Embedded Power for
Business-Critical Continuity
Ordering Information
Model
Number
Output
Voltage
LPS102-M
5V
Minimum
Load
0A
Maximum Load
with Convection
Cooling
16 A
Maximum Load
with 30CFM Peak Load Regulation²
Forced Air
24 A
30 A
±2%
Ripple
P/P
(PARD)³
50 mV
LPS103-M
12 V
0A
8.3 A
12.5 A
14 A
±2%
120 mV
LPS104-M
15 V
0A
6.7 A
10 A
11 A
±2%
150 mV
LPS105-M
24 V
0A
4.2 A
6.3 A
7A
±2%
240 mV
LPS108-M
48 V
0A
2.1 A
3.1 A
3.5 A
±2%
480 mV
1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.
2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3­. Peak-to-peak with 20 mHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage
and load ranges.
Pin Assignments
Connector LPS100-M
SK1
Pin 1
Neutral
Pin 3
Line
SK2
Pin 1
Common
Pin 2
Common
Pin 3
Pin 4
Common
Common
Pin 5
Pin 6
Pin 7
+Vout
+Vout
+Vout
SK203
Pin 8
Pin 1
+Vout
Common
Pin 2
Power Fail
Pin 3
Pin 4
- Remote Sense
+ Remote Sense
SK5
Pin 1
+12 V Fan
Pin 2
+12 V Fan
Pin 3
Fan Return (Isolated)
Pin 4
Fan Return (Isolated)
Mating­ Connectors
AC Input (SK1):
Molex P/N: 09-50-8031, Pins:08-52-0113
or
Landwin P/N: 3060S0302, Pins: 3360T011P
AC Ground
DC Output (SK2):
Molex: 01-90020001
Molex P/N: 09-50-8081, Pins: 08-52-0113
or
Landwin P/N: 3060S0802, Pins: 3360T011P
Remote Sense
(SK203):
Molex P/N: 35155-0400, Pins: 08-70-0057
or
Landwin P/N: 2640S04A0, Pins: 2543T011P
Fan: (SK5):
Molex P/N: 22-01-1042, Pins: 08-70-0049
or
Landwin: P/N: 2510S04A0, Pins: 2543T011P
Emerson Network Power Connector Kit #70-841-025, includes
all of the above
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ±.02”.
3. mounting holes MH1, MH2 should be grounded for EMI
purpose
4. Mounting MH1 is safety ground connection
5. Specifications are for convection rating at factory settings
at 115 Vac input 25 °C unless otherwise stated.
6. This power supply requires mounting on metal standoffs
0.20” (5 m) in height.
7. Warranty:2 year
8. Weight:0.44 lb. / 0.20 kg
­Americas
5810 Van Allen Way
Rev. 1.16.09_114
LPS100-M Series
 of 3
Carlsbad, CA 92008
USA
Telephone: [phone]
Facsimile: [phone]
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: [phone]
Facsimile: [phone]
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
Telephone: [phone]
Facsimile: [phone]
For global contact, visit:
www.PowerConversion.com
techsupport.embeddedpower
@emerson.com
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
Emerson Network Power.
The global leader in enabling
business-critical continuity.
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
EmersonNetworkPower.com
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2008 Emerson Electric Co.