SIL25C Datasheet, PDF (2/3 Pages) Artesyn Technologies – Single negative output 25 A DC-DC Converter C Class Non-Isolated

SIL25C Series
12 Vin single negative output
DC-DC CONVERTERS C Class Non-isolated
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
NEW Product
OUTPUT
POWER
(MAX.)
INPUT
VOLTAGE
125 W 10.2-13.8 Vdc
OVP
N/A
OUTPUT
OUTPUT _CURRENT
VOLTAGE ⁽¹⁰⁾
(MIN.)
-5.05 V
0A
OUTPUT
CURRENT
(MAX.)
25 A
EFFICIENCY
(TYP.)
90%
REGULATION
LINE LOAD
MODEL
NUMBER^(11,12)
±1.0% ±1.0% SIL25C-12SNEG-VJ
Part Number System with Options
SIL25C-12SNEG-VJ
Product Family
SIL = Single in Line
Rated Output Current
25 = 25 Amps
Performance
C = Cost Optimized
Packaging Options ⁽¹¹⁾
J = Pb-free (RoHS 6/6 compliant)
Mounting Option
V = Vertical Mount
Polarity
NEG = -5.05 V
Number of Outputs
S = Single Output
Input Voltage
12 = 10.2 Vdc to 13.8 Vdc
Notes
1 Uses external resistor. See Application Note 148 for details.
2 Measured with external filter. See Application Note 148 for details.
3 di/dt = 1 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max to 0.75
lo max and 0.75 lo max to 0.5 lo max.
4 External input fusing is recommended.
5 Power up is the time from application of dc input to POWER GOOD high.
Remote ON/OFF asserted high to POWER GOOD high.
6 Signal line assumed <3 m.
7 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
8 See Application Note 148 for operation above 50ºC.
9 See Application Note 148 for ripple current requirements.
10 Output can be adjusted from -4.5 Vdc to -5.5 Vdc.
11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
12 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
File Name: sil25c_12_neg.pdf Rev (02): 16 Dec 2005