LPT40-M Datasheet, PDF (2/3 Pages) Astec America, Inc – 40 Watts

Embedded Power for
Business-Critical Continuity
Rev. 2.16.09_165
LPT40-M Series
 of 3
Environmental Specifications
Operating temperature: 0° to 50 °C ambient derate each output at 2.5% per degree from 50° to 70 °C, -20 °C start up.
Electromagnetic
susceptibility:
Humidity:
Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3
Operating; non-condensing 5% to 95%
Vibration:
Storage temperature:
Temperature coefficient:
MTBF demonstrated:
Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5 Hz to 500
Hz, operational
-40° to 85 °C
±.04% per °C
> 550,000 hours at full load and 25 °C ambient conditions
Ordering Information
Model Number
Output Minimum Maximum Load with Maximum Load with
Voltage Load Convection cooling 30CFM Forced Air
Peak
Load¹
Regulation²
+5V
0.4A
4A
5A
7A
±2%
LPT42-M
+12V
0.2A
2A
2.5A
4A
±5%
-12V
0A
0.5A
0.7A
1A
±5%
+5V
0.4A
4A
5A
7A
±2%
LPT45-M
+15V
0.2A
2A
2.5A
3A
±5%
-15V
0A
0.5A
0.7A
1A
±5%
1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.
2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
Ripple P/P
(PARD)³
50mV
120mV
120mV
50mV
150mV
150mV
3­. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. Minimum Loads are required.
Power Derating Curve
55W
30 CFM Forced Air Cooling
40W
Output ^30W
Power
(Watts) _20W
Natural
Convection
Cooling
27.5W
20W
10W
0W
0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C
TA – Ambient Temperature – °C