EXB30 Datasheet, PDF (2/2 Pages) Artesyn Technologies – 16-30W High Efficiency DC/DC Converters

EXB30 Series
Single output
DC-DC CONVERTERS 16-30 W High Efficiency DC-DC Converters
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT
POWER
(MAX.)
16 W
20 W
26.4 W
30 W
30 W
INPUT
VOLTAGE
36-75 Vdc
36-75 Vdc
36-75 Vdc
36-75 Vdc
36-75 Vdc
OVP
2.3 Vdc
2.9 Vdc
3.8 Vdc
5.65 Vdc
14.2 Vdc
OUTPUT
VOLTAGE
2V
2.5 V
3.3 V
5V
12 V
OUTPUT
CURRENT
(MIN.)
0A
0A
0A
0A
0A
OUTPUT
CURRENT
(MAX.)
8A
8A
8A
6A
2.5 A
EFFICIENCY
(TYP.)
86%
87%
90%
92%
90%
REGULATION
LINE LOAD
±0.1%
±0.1%
±0.1%
±0.1%
±0.1%
±0.2%
±0.2%
±0.2%
±0.2%
±0.2%
MODEL
NUMBER ^(8,9)
EXB30-48S2V0J
EXB30-48S2V5J
EXB30-48S3V3J
EXB30-48S05J
EXB30-48S12J
Notes
1 Measured as per recommended set-up.
2 di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max.
3 The EXB30 meets level A and level B conducted emissions only with
external components connected before the input pins to the converter.
Full details are given in Application Note 108 on the website.
4 Recommended input fusing is a 2 A HRC 200 V rated fuse.
5 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
6 Simulated source impedance of 12 µH. 12 µH inductor in series with +Vin.
7 Start-up into resistive load.
8 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
9 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
PROTECTION
Short circuit
Overvoltage
Thermal
TELECOM SPECIFICATION
Central office interface A
Continuous
Non-latching clamp
125 °C hot spot temperature with
automatic recovery
ETS300-132-2, input voltage
and current requirements
CAUTION: Hazardous internal voltages and high temperatures.
Ensure that unit is not user accessible.
EXTERNAL OUTPUT TRIMMING
All models can be externally trimmed by
using the method shown below.
+ Sense
TRIM
UP
Trim
- Sense
TRIM
DOWN
RT1
or
RT2
OPEN-FRAME
HEIGHT
ø0.040 ±0.002
(ø1.02 ± 0.05)
STAND-OFFS
4 PLACES
1
9
8
BOTTOM
VIEW
7
3
6
4
5
1.90
(48.26)
2.28 ±0.02
(57.91 ±0.5)
0.19
(4.83)
ALL DIMENSIONS IN INCHES (mm)
General Tolerance ±0.010 (0.25)
(unless otherwise specified)
PIN CONNECTIONS
PIN NUMBER
1
2
3
4
5
6
7
8
9
FUNCTION
- Vin
No Pin
Remote ON/OFF
+ Vin
+ Vout
+ Sense
Trim
- Sense
- Vout
Datasheet © Artesyn Technologies® 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items:  Application Note  Longform Datasheet
www.artesyn.com
File Name: exb30s.pdf Rev: 05 Dec 2005