ALO20F36 Datasheet, PDF (2/2 Pages) Emerson Network Power – Wide Range Input

AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: [phone]
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: [phone]
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Kwai Fong, New Territories
Hong Kong
Telephone: [phone]
Facsimile: 852-2402-4426
Ordering Information
Input Voltage
19V to 60V
Output Voltage
3.3V
Output Current
20A
Efficiency²
91%
Model Number
ALO20F36(N) - (6)(L)
OPTIONS:
(N) : "N" = designates Negative Logic Enable (default is Positive Enable with no suffix “N” required)
(6) : "6" = 3.7mm nominal pin length (default is 5mm nominal pin length with no suffix “-6” required)
(L) : "L" = RoHS compliant (RoHS 6) / “Blank” = RoHS compliant with Lead (Pb) in solder exemption
Pin Assignment
Single Output
1. +Vin
2. Enable (On/Off)
3. -Vin
4. -V_OUT
5. -Sense
6. Trim
7. +Sense
8. +V_OUT
Notes:
1. 20 MHz bandwidth. External 10 uF tant. capacitor in
parallel with 0.1 uF ceramic capacitor placed across
the output and secondary return ground.
2. Efficiency measurements are typical values taken at
full load, 24V or 48V input and T_A = 25°C.
3. All specifications are typical at nominal line, full load
and T_A = 25°C unless otherwise noted.
4. All specifications subject to change without notice.
5. Mechanical drawings are for reference only.
Dimensions are in inches [mm]. Pin placement
tolerance ± 0.005 [0.127]. Mechanical Tolerance ±
0.02 [0.5]. Through hole pin diameter (Pins 4 & 8)
∅ = 0.062 [1.57], others ∅ = 0.04 [1.0] (6X).
6. Technical Reference Notes should be consulted for
detailed information when available.
7. Warranty 1yr.
This is a Preliminary Data Sheet. Astec reserves the right to
make changes to the information contained herein without notice
and assumes no liability as a result of its use and application.
(REV 03: MARCH 8, 2007)
www.astecpower.com
ALO - OPENFRAME
PIN 3
0.15
[3.8]
0.45
[11.4]
0.75
[19.0]
2.00
[50.8]
PIN 4
0.15
[3.8] _0.30
[7.6]
0.45
[11.4] _0.60
[15.2]
0.75
[19.0]
PIN 1
PIN SIDE UP
PIN 8
0.32
[8.2]
See A
PIN LENGTH
A
Std Pin Length: 0.189 [4.8] MIN
0.205 [5.2] MAX
“-6” Option:
0.137 [3.5] MIN
0.152 [3.9] MAX
3