AEO Datasheet, PDF (2/2 Pages) Emerson Network Power – High Efficiency

AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: [phone]
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: [phone]
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: [phone]
Facsimile: 852-2402-4426
Ordering Information
Input Voltage
Output Voltage
Output Current
Efficiency²
Model Number
36V to 75V
36V to 75V
36V to 75V
36V to 75V
36V to 75V
36V to 75V
36V to 75V
12.0V
5.0V
3.3V
2.5V
1.8V
1.5V
1.2V
10A
93.0%
A (X)O10B48 (N) - (6)(S)(L)
20A
92.0%
A (X)O20A48 (N) - (6)(S)(L)
30A
91.0%
A (X)O30F48 (N) - (6)(S)(L)
35A
89.5%
A (X)O35G48 (N) - (6)(S)(L)
40A
88.0%
A (X)O40Y48 (N) - (6)(S)(L)
40A
86.0%
A (X)O40M48(N) - (6)(S)(L)
40A
85.0%
A (X)O40K48 (N) - (6)(S)(L)
OPTIONS:
(X) : “L” = Open Frame / Low Profile
“E” = Baseplate Construction
(N) : "N" = designates Negative Logic Enable (default is Positive Enable with no suffix “N” required)
(6) : “-6” = 3.7mm nominal pin length (default is 5mm nominal pin length with no suffix “-6” required)
(S) : “-S”= Surface Mount Termination (default is Through Hole Termination with no suffix “-S” required)⁷
(L) : “L” = RoHS compliant (RoHS 6) / “Blank” - RoHS compliant with Lead (PB) in solder exemption (RoHS 5)
Pin Assignment
Single Output
1. +Vin
2. Enable (On/Off)
3. -Vin
4. -V_OUT
5. -Sense
6. Trim
7. +Sense
8. +V_OUT
Notes:
1. Measured at 20 MHz bandwidth with external 10 µF
tant. capacitor in parallel with 0.1 µF ceramic
capacitor connected across +Vout and -Vout; 220 µF
e-cap or equivalent connected across +Vin and -Vin.
2. Efficiency measurements are typical values taken at
full load, nominal line and T_A = 25°C.
3. All specifications are typical at nominal line, full load
and T_A = 25°C unless otherwise noted.
4. All specifications subject to change without notice.
5. Mechanical drawings are for reference only.
Dimensions are in inches [mm]. Pin placement
tolerance ± 0.005 [0.127]. Mechanical Tolerance ±
0.02 [0.5], recommended surface mount pads (min:
0.080 x 0.112 [2.03 x 2.84] / max: 0092 x 0.124
[2.34 x 3.15]); through hole pin diameter (Pins 4 & 8)
∅ = 0.062 [1.57], others ∅ = 0.04 [1.0] (6X).
6. Technical Reference Notes should be consulted for
detailed information when available.
7. AEOxxxxxx-Sx series (surface mount termination
with baseplate) are not reflow compatible.
8. Warranty 2 yrs.
Astec reserves the right to make changes to the information
contained herein without notice and assumes no liability as a
result of its use and application. (REV 02: MARCH 7, 2007)
0.45
[11.4]
0.75
[19.1]
ALO - OPENFRAME
2.19
[55.5]
0.15
[3.8]
0.15
[3.8]
0.30
[7.6]
0.45
[11.4] _0.60
[15.2] 0.75
[19.1]
SMT - Termination
0.15
[3.9]
0.31
[7.9]
0.32
TH - Termination
[8.2]
See A
AEO -BASEPLATE
2.00
0.15
[50.8]
[3.8]
0.45
[11.4]
0.75
[19.0]
PIN 1
0.39
[9.8]
SMT - Termination
T^PH^IN-^ST^IDe^Erm^DOin^Wa^Ntion
PIN LENGTH
A
Std Pin Length: 0.189 [4.8] MIN
0.205 [5.2] MAX
“-6” Option:
0.137 [3.5] MIN
0.152 [3.9] MAX
0.15
[3.8] _0.30
[7.6]
0.45
[11.4] _0.60
[15.2]
0.75
[19.0]
PIN 8
0.15
[3.9]
0.40
[10.1]
0.23
[5.8]
See A
www.astecpower.com
3