SMT10E Datasheet, PDF (1/3 Pages) Artesyn Technologies – 3.0 Vin to 5.5 Vin Single output

SMT10E Series
12 Vin single output
DC-DC CONVERTERS E Class Non-isolated
• 10 A Current rating
• Input voltage range: 10 Vdc to 14 Vdc
• Output voltage range: 0.8 Vdc to 3.63 Vdc
• Ultra high efficiency: 94% @ 12 Vin and 3.3 Vout
• Extremely low internal power dissipation
• Minimal thermal design concerns
• Designed in reliability: MTBF of 6,920,000 hours
per Telcordia SR-332
• Ideal solution where board space is at a premium
or tighter card pitch is required
• Industry standard surface-mount footprint
• Available RoHS compliant
1
NEW Product
The SMT10E series are non-isolated dc-dc converters packaged in a surface-mount footprint
giving designers a cost effective solution for conversion from a 12 V source. The SMT10E has a
wide input range (10 Vdc to 14 Vdc) and offers a wide 0.8 Vdc to 3.63 Vdc output voltage range
with a 10 A load, which allows for maximum design flexibility and a pathway for future upgrades.
The SMT10E is designed for applications that include distributed power, workstations, optical
network and wireless applications. Implemented using state of the art surface-mount
technology and automated manufacturing techniques, the SMT10E offers compact size and
efficiencies of up to 94%.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
0.8-3.63 Vdc
Setpoint accuracy
±0.4% typ.
Line regulation
±0.2% typ.
Load regulation
±1.0%typ.
Total error band
±3.0% typ.
Minimum load
0A
Overshoot/undershoot
None
Ripple and noise
5 Hz to 20 MHz
60 mV pk-pk
25 mV rms
Temperature co-efficient
±0.01%/ºC
Transient response
100 mV max. deviation
100 µs recovery to
within ±1.0%
Remote sense
10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range
10-14 Vdc
Input current
No load (max.)
100 mA
Input current (max.)
3 A max. @ Io max.
and Vout = 3.3 V
Input reflected ripple
100 mA rms
Remote ON/OFF
(See Note 1)
Start-up time
20 ms
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,
File No. E174104
TÜV Product Service (EN60950) Certificate No. B03 10 38572 037
CB Report and Certificate to IEC60950, Certificate No.
DE3-51686M1
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
94%
Insulation voltage
Non-isolated
Switching frequency
Fixed
200 kHz typ.
Approvals and
standards
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(LxWxH)
33.02 x 13.46 x 8.21 mm
1.3 x 0.53 x 0.323 inches
Weight
6.3 g (0.22 oz)
Coplanarity
100 µm
MTBF
Telcordia SR-332
6,920,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 2)
Operating ambient,
temperature
Non-operating
-40 ºC to +85 ºC
-40 ºC to +125 ºC
PROTECTION
Short-circuit
Thermal
Continuous
Automatic recovery
File Name: smt10e_12.pdf Rev (03): 16 Dec 2005