SIL15E Datasheet, PDF (1/3 Pages) Artesyn Technologies – 3.0 Vin to 5.5 Vin Single output

SIL15E Series
12Vin single output
DC/DC CONVERTERS E Class Non-isolated
• 15A Current rating
• Input voltage range: 10V - 14V
• Output voltage range: 0.8V - 3.63V
• Ultra high efficiency: 94% @ 12Vin and 3.3Vout
• Extremely low internal power dissipation
• Minimal thermal design concerns
• Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
• Ideal solution where board space is at a premium
or tighter card pitch is required
• Industry standard footprint and pin out
1
NEW Product
The SIL15E series are non-isolated DC/DC converters packaged in a single-in-line footprint
giving designers a cost effective solution for conversion from a 12V source. The SIL15E
offers a range of fixed outputs and one wide trim output unit at an industry leading 15A
which allows maximum design flexibility and a pathway for future upgrades. The SIL15E is
designed for applications that include distributed power, workstations, optical network and
wireless applications. Implemented using state of the art surface mount technology and
automated manufacturing techniques, the SIL15E offers compact size and efficiencies of up
to 94%.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
TÜV
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
Setpoint accuracy
Line regulation
Load regulation
Total error band
Minimum load
Overshoot/undershoot
Ripple and noise
5Hz to 20MHz
Temperature co-efficient
Transient response
Remote sense
0.8V to 3.63V
±0.4% typ.
±0.2% typ.
±1.0%typ.
±3.0% typ.
0A
None
60mV pk-pk
25mV rms
±0.01%/ºC
100mV max. deviation
100µs recovery to
within ±1.0%
10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range
Input current
No load
Input current (max.)
Input reflected ripple
Remote ON/OFF
Start-up time
10 to 14VDC
70mA
5.5A max. @ Io max.
and Vout = 3.3V
60mA rms
(See Note 1)
35ms
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
See table
Insulation voltage
Non-isolated
Switching frequency
Fixed
200kHz typ.
Approvals and
standards
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(Vertical model)
(LxWxH)
50.8 x 7.8 x 12.7mm
2.0 x 0.31 x 0.5 inches
Pin length
0.135 ±0.02 in (3.43 ±0.5mm)
Weight
5g (0.18oz)
MTBF
Telcordia SR-332
7,042,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 2)
Operating ambient,
temperature
Non-operating
-40ºC to +85ºC
-40ºC to +125ºC
PROTECTION
Short-circuit protection
Thermal protection
Continuous
Automatic recovery
International Safety Standard Approvals
TÜV
UL/cUL CAN/CSA 22.2 No. E174104
UL 60950 file No. E174104
TÜV Product Service (EN60950) Certificate No. B02 12 38272 035
CB report and certificate to IEC60950
File Name: sil15e_12.pdf Rev: 14 Aug 2003