SIL10E Datasheet, PDF (1/3 Pages) Artesyn Technologies – DC/DC CONVERTERS

SIL10E Series
3.0 Vin to 5.5 Vin single output
DC-DC CONVERTERS E Class Non-isolated
• 10 A Current rating
• Input voltage range: 3.0 Vdc to 5.5 Vdc
• Output voltage range: 0.8 Vdc to 3.63 Vdc
• Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout
• Extremely low internal power dissipation
• Minimal thermal design concerns
• Designed in reliability: MTBF of >7 million hours
per Telcordia SR-332
• Ideal solution where board space is at a premium
or tighter card pitch is required
• Industry standard footprint and pin out
• Available RoHS compliant
The SIL10E series are non-isolated dc-dc converters packaged in a single-in-line footprint
giving designers a cost effective solution for conversion from either a 5 V or a 3.3 V source.
The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry
leading 10 A which allows maximum design flexibility and a pathway for future upgrades.
The SIL10E is designed for applications that include distributed power, workstations, optical
network and wireless applications. Implemented using state of the art surface mount
technology and automated manufacturing techniques, the SIL10E offers compact size and
efficiencies of up to 96%.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
1
NEW Product
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 1)
Fixed output versions
5 Vin with wide trim
3.3 Vin with wide trim
±10%
0.8-3.63 Vdc
0.8-2.75 Vdc
Setpoint accuracy
±0.4%
Line regulation
±0.2%
Load regulation
±1.0%
Minimum load
0A
Overshoot/undershoot
None
Ripple and noise
0 to 20MHz BW
50 mV pk-pk
25 mV rms max.
Temperature co-efficient
±0.01%/ºC
Transient response
50 mV max. deviation
50 µs recovery to
within ±1.0%
Remote sense
10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range
3.0-5.5 Vdc
Input current
No load
70 mA
Input current (max.)
Input current ripple
Remote ON/OFF
Start-up time
8 A max. @ Io max.
and Vout = 3.3 V
65 mA rms
(See Note 2)
20 ms
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,
File No. E174104
TÜV Product Service (EN60950) Certificate No. B 03 10 38572 037
CB Report and Certificate to IEC60950, Certificate No.
DE3-51686M1
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
See table
Insulation voltage
Non-isolated
Switching frequency
Fixed
300 kHz typ.
Approvals and
standards
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(vertical version)
(LxWxH)
50.8 x 7.8 x 12.7 mm
2.0 x 0.31 x 0.5 inches
Pin length
(Vertical) 0.135 ±0.02 in (3.43 ±0.5 mm)
Weight
5 g (0.18 oz)
MTBF
Telcordia SR-332
MIL-HDBK-217F
7,042,000 hours
680,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 3)
Operating ambient,
temperature
Non-operating
-40 ºC to +100 ºC
-40 ºC to +125 ºC
PROTECTION
Short-circuit
Thermal
Continuous
Automatic recovery
File Name: sil10e_05.pdf Rev (04): 16 Dec 2005