PTH12060 Datasheet, PDF (1/5 Pages) Artesyn Technologies – DC/DC CONVERTERS POLA Non-isolated

PTH12060
12 Vin single output
DC/DC CONVERTERS POLA Non-isolated
1
• 10 A output current
• 12 V input voltage
• Wide-output voltage adjust
• 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and
0.8 Vdc to 1.8 Vdc for suffix ‘L’
• Auto-track™ sequencing*
• Margin up/down controls
• Efficiencies up to 94%
• Output ON/OFF inhibit
• Output voltage sense
• Point-of-Load-Alliance (POLA) compatible
• Available RoHS compliant
The PTH12060 is a next generation series of non-isolated dc-dc converters offering
some of the most advanced POL features available in the industry. The primary new
feature provides for sequencing between multiple modules, a function, which is
becoming a necessity for powering advanced silicon including DSP’s, FPGA’s and
ASIC’s requiring controlled power-up and power-down. Other industry leading
features include margin up/down controls and efficiencies up to 94%. The PTH12060
has an input voltage of 10.8 Vdc to 13.2 Vdc and offers a wide output voltage range
adjustable with external trim resistor, allowing for maximum design flexibility and a
pathway for future upgrades.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
C_in = 560 µF, C_out = 0 µF
NEW Product
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
(See Note 4)
Suffix ‘W’
Suffix ‘L’
1.2-5.5 Vdc
0.8-1.8 Vdc
Setpoint accuracy
±2.0% Vo
Line regulation
±10 mV typ.
Load regulation
±12 mV typ.
Total regulation
±3.0% Vo
Minimum load
0A
Ripple and noise
20 MHz bandwidth
(See Note 8)
Suffix ‘W’
Suffix ‘L’
V_o ≤ 2.5 V
V_o > 2.5 V
V_o ≤ 1.0 V
V_o > 1.0 V
Temperature co-efficient -40 ºC to +85 ºC
25 mV pk-pk
1% V_o
20 mV pk-pk
30 mV pk-pk
±0.5% Vo
Transient response
(See Note 5)
70 µs recovery time
Overshoot/undershoot 100 mV
Margin adjustment
±5.0% Vo
INPUT SPECIFICATIONS
Input voltage range
(See Note 3)
Input current
No load
Remote ON/OFF
(See Note 1)
Start-up time
Undervoltage lockout
Track input voltage
Pin 8 (See Note 6)
10.8-13.2 Vdc
10 mA typ.
Positive logic
1 V/ms
9.0-9.5 V typ.
±0.3 Vin
EMC CHARACTERISTICS
Electrostatic discharge
Conducted immunity
Radiated immunity
EN61000-4-2, IEC801-2
EN61000-4-6
EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency
See Tables on page 2
Insulation voltage
Non-isolated
Switching frequency
Over V_in and I_o ranges
Approvals and
standards
Suffix ‘W’
Suffix ‘L’
350 kHz typ.
250 kHz typ.
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(L x W x H) 25.27 x 15.75 x 9.00 mm
0.995 x 0.620 x 0.354 in
Weight
5 g (0.18 oz)
MTBF
Telcordia SR-332
7,092,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 2)
Operating ambient, -40 ºC to +85 ºC
temperature
Non-operating
-40 ºC to +125 ºC
MSL (‘Z’ suffix only)
JEDEC J-STD-020C
Level 3
PROTECTION
Short-circuit
Auto reset
20 A typ.
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,
File No. E174104
TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044
CB Report and Certificate to IEC60950, Certificate No.
US/8292/UL
*Auto-track™ is a trade mark of
Texas Instruments
File Name: pth12060.pdf Rev: 28 Jun 2006