NLS110-9602J Datasheet, PDF (1/3 Pages) Artesyn Technologies – 80-110 W AC/DC Universal Input Switch Mode Power Supplies

NLS110-9602J
Quad output
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110 W AC/DC Universal Input Switch Mode Power Supplies 1
• 7.0 x 4.25 x 1U package
• Overvoltage and short circuit protection
• 110 W with 20 CFM
• 90 Vac to 264 Vac universal input range
• EN55022 conducted emissions level B, radiated
emissions level A
• UL, VDE and CSA safety approvals
• CE mark
• Available RoHS compliant
The NLS110-9602J is a 110 W universal input ac-dc power supply on a 7 x 4.25 inch
card. The NLS110-9602J has proven itself to be highly reliable and versatile product for
a wide range of communication and industrial applications, with a very high peak
current capability on each output for drive and motor applications. The NLS110-9602J
provides 80 W of output power with free air convection cooling which can be boosted
to 110 W with 20 CFM of air. Standard features include overvoltage and short circuit
protection. The NLS110-9602J with full international safety approval and the CE mark,
meets conducted emissions EN55022 level B. The NLS110-9602J is designed for use
in low power data networking, computer, telecom and industrial applications such as
servers, thermal printers, storage devices, vending machines and POS equipment.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Total regulation
Line and load
Rise Time
At turn-on
Transient response
Temperature coefficient
Overvoltage protection +5.1 V
Short circuit protection Cyclic operation
(See table)
1.0 s, max.
(See table)
±0.02%/°C
125%, ±10%
Yes with auto
recovery
INPUT SPECIFICATIONS
Input voltage range
Universal input
Input frequency range
Input surge current
(cold start)
120 Vac
230 Vac
Safety ground
leakage current
120 Vac, 60 Hz
230 Vac, 50 Hz
Input current
120 Vac @ 80 W
120 Vac @ 110 W
230 Vac @ 80 W
230 Vac @ 110 W
Input fuse
UL/IEC127
90-264 Vac
47-440 Hz
18 A max.
35 A max.
0.45 mA
0.75 mA
0.95 A rms
1.35 A rms
0.53 A rms
0.75 A rms
F3.15A H, 250 Vac
EMC CHARACTERISTICS ⁽¹¹⁾
Conducted emissions
Radiated emissions
Harmonic current
emission correction
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-3-2
EN61000-4-2
EN61000-4-2
EN61000-4-5
EN61000-4-4
EN61000-4-3
EN61000-4-6
Level B
Level A
Compliant
Level 3
Level 3
Level 3
Level 3
Level 3
Level 3
GENERAL SPECIFICATIONS
Hold-up time
120 Vac @ 60 Hz
35 ms @ 80 W
25 ms @ 110 W
Efficiency
120 Vac @ 110 W
70% min.
Isolation voltage
Input/output
Input/chassis
3000 Vac
1500 Vac
Approvals and
standards
EN60950, VDE0805, IEC950
UL1950, CSA C22.2 No. 950
Weight
383 g (13.5 oz.)
MTBF (@ 25 ˚C)
MIL-HDBK-217F 220,000 hours min.
ENVIRONMENTAL SPECIFICATIONS ^(6,8)
Thermal performance
Operating ambient,
0 °C to +50 °C
(see derating curve)
Non-operating
–40 °C to +85 °C
+50 °C to +70 °C,
Derate to
amb. convection cooled
50% load
0 °C to +50 °C,
80 W
amb. convection cooled
0 °C to +50 °C ambient,
110 W
150 LFM forced air
Peak (0 °C to +50 °C, 60 s) (See Note 4)
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Vibration (See Note 7) 5-500 Hz
2.4 G rms peak
Shock
per MIL-STD-810E
516.4 Part IV
File Name: nls110.pdf Rev (02): 08 Nov 2005