|
MP Datasheet, PDF (1/8 Pages) Vishay Siliconix – Surface Mount Network | |||
|
400-1200 Watts
MP Series
MP4
MP6
MP8
Special Features
⢠Current share on all outputs with ratings
of 10 A or greater
⢠Remote sense on all outputs with ratings
greater than 2 A
⢠Overload protection on all outputs
⢠Voltage adjustment on all outputs
⢠Margining on all single output modules
⢠Input OK signal and status indicator LED
⢠Global DC OK signal and status indicator LED
⢠Global and individual module inhibits/enable
⢠2 year warranty
⢠Forced air cooling, field replaceable fan
⢠Isolated 5 V bias voltage
⢠Power factor correction
⢠EN61000-3-2 harmonic distortion compliance
⢠CISPR 22, EN55022 Curve B conducted / radiated EMI
⢠European CE Mark requirements
⢠Optional VME timing and system DC OK module
⢠Customer-provided air option
⢠Additional 200 W output @ high line (180-264 VAC)
⢠Low leakage option for medical applications
⢠EN61000 immunity standards
⢠Standard modification flexibility (consult factory)
Low noise fan
Fan fail signal
Module enable
Outputs down to 0.5V
Environmental
Operating temperature: -20°C to 50°C (start @ 0°C)
(derate each output linearly to 50% at 70°C)
(-20°C to 40°C max. with rear air option)
Shock/Vibration: Mil-Hdbk 810E
Humidity: 95% non-condensing
Storage temperature: -40°C to +85°C
Temperature coefficient: 0.02% per °C
Cooling: Internal DC fan or customer provided air (option)
Safety
MP1
UL
CSA
IEC
VDE
BABT
CB
CE
UL1950
CSA22.2 No. 234 Level 5
IEC950, Class 1
EN60950,
Compliance to EN 60950, BS 7002
Certificate and report
Mark
Technical Support: (888) 41ASTEC or (407) 241-2752
136
Americas: (760) 930-4600
Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662
Rev 2.17.06
|
▷ |