LPX80 Datasheet, PDF (1/1 Pages) Astec America, Inc – ENCLOSURE

LPX 80
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: [phone]
Facsimile: 760-930-0698
ENCLOSURE
Installation Notes
LPX80 • Cover Enclosure Kit
LPX80 will fit all the LPX8X power supplies
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: [phone]
Facsimile: [phone]
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Kwai Fong, New Territories
Hong Kong
Telephone: [phone]
Facsimile: 852-2402-4426
(2X) M3 INSERTS
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: [phone]
Facsimile: 44 (1384) 843-355
OUTPUT TERMINALS
Ø0.35 [Ø8.8]
INPUT
WIRING
ACCESS
1.134 [ 28.8 ]
1.181 [ 30.0 ]
5.906 [150.0]
0.984 [ 25.0 ]
2.236 [ 56.8 ]
3.858 [98.0]
OUTPUT
WIRING ACCESS
INPUT TERMINALS
INSULATOR
(2X) M3 INSERTS
(2X) 4.331 [110.0]
(2X) 0.364 [ 9.3 ]
(2X) 0.787 [ 20.0 ]
(2X) Ø4mm MTG HOLES
(4X) STANDOFF
(2X) 4.803 [122.0]
(2X) 3.543 [90.0]
A
A
GROUND STUD
0.25 [6.4]
Ø0.14 [Ø3.6]
(2X) 3.150 [80.0]
A
A
(2X) 0.354 [ 9.0 ]
M3 INSERTS
(4X) MARKED "A"
1.748 [44.4]
(2X) 0.591 [15.0]
(2X) 0.787 [20.0]
(2X) 0.738 [ 18.8 ]
(4X) M3 STANDOFF
FOR MTG POWER SUPPLY
(2X) 2.55 [65]
(2X) 2.756 [70.0]
(2X) 0.657[ 16.7 ] (2X) 0.551 [ 14.0 ]
SEE KEYWAY DETAILS
MATERIALS
1 Base
1 Cover
4 M3 x 6mm pan head screws with spring washer
4 M3 x 6mm countersunk sdrews
1 M4 nut
1 M4 star washer
1 M4 spring washer
1 Plastic insulator sheet
NOTES
1. All dimensions are in inches (mm)
2. Overall dimensions:
5.9 (150) x 3.9 (98.0) x 1.75 (44.4)
3. Base plate has three sets of customer mountings:
a. Bottom mounting (4x) M3 inserts. Max. screw penetration 0.0787 (2mm)
b. Bottom mounting (2x) 4mm clear holes plus 2 keyways (see keyway detail)
c. Side mountings (4x) M3 inserts. Max. screw penetration 0.236 (6mm)
4. Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and
clearances.
5. Ensure base is firmly connected to supply earth via the earth stud marked .
6. When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are
complied with, in respect to creepage and clearance distances, and distances through
insulation.
Technical Support: (888) 41-ASTEC or [phone]
Americas: [phone]
Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662
rev 8.25.04