LPX50 Datasheet, PDF (1/2 Pages) Astec America, Inc – LPX50 Enclosure

Embedded Power for
Business-Critical Continuity
LPX50 Enclosure ^{(2X)M3 INSERT}
Rev. 02.16.09_159
LPX50 Enclosure
 of 2
Installation Notes
0.980 L[P24X,9 5]0 • Cover Enclosu0r.8e02 Kit[ 20,4 ]
LPX50 will fit the LPX5X and LPX10X-M power
supplies.
1.457
[ 37,0 ]
2.945
[ 74,8 ]
OUTPUT TERMINALS
INPUT TERMINALS
INSULATOR
4.685 [ 119,0 ]
Materials
1.693
[ 43,0 ]
• 1 Base
(4X)STANDOFF
• 1 Cover
(2X)
•^2.677
4
M^{[ 68,0}3x^] 6mm
Pan
hea^(2Xd⁾
0.591
[ 15,0
]
GROUND STUD
(2X)
3.727
screws
[ 94,7 ]
with
sprin_ÿ0g_.35(ÿw_8.8)asher
• 4 M3x6mm countersunk
ÿ0.14(ÿ3.6)
Installation Instructions and Notes
screws (2X) 2.283 [ 58,0 ]
0.25(6.4) _{1. Place the insulator over the chassis as shown.}
• 1 M4 nut
(2X) KEYWAY DETAIL
2. Place the power supply over the insulator as shown.
• 1 M4 star washer
3. Align the 4x power supply to the chassis standoff.
A • 1 M4 sA pring washer
4. Secure 4 pan head screws with washer provided with in kit as shown.
• 1 Plastic insulato_{1[ .7}r_4234,8sh_] e_2[e_.2506t_{5,0 ]}
5. Place the cover over the power supply as shown.
6. Align the 4x cover to the U-bracket countersink holes.
A
A
7. Secure 4 countersink screws provided with in kit as shown.
8. Overall dimensions: 4.685 (119.0) x 2.945 (74.8) x 1.693 (43.0).
(4X)M3 INSERT
MARKED"A"
SEE KEYWAY DETAILS
9. Base plate has three sets of customer mountings:
a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm)
b. Side mounting (2X) 4mm clear holes plus 2 keyways. (See keyway detail)
c. Side mounting (4X) M3 inserts. Max. screw penetration 0.236 (6mm)
NOTES
10. Ensure insulator is correctly fitted in base under PCB to maintain safety creepage
and clearanc^Me^ATs^E.^RIALS
1. All dimensions are in inches(mm)
2. Overall dimensions
11. Ensure base ¹¹is^BCaosvf^eei_rrmly connected to supply earth v3i.Baaset^4.p6hl8a5tee(1h1ea9s.0at)hxrre2te.9hs4e5ts(s^7o4tf.8cu^)uxsdt1o.m69me3r(4m3ao.0ur⁾ⁿktinegsd:
12.
When
using
44_tMM_h33_iXX_s66mm_emm_nPCao_cnunh_{lteoeardssusnu}ckre_rswcerseww,ist_eh s_npri_sng_uw_ra_eshe_tr _hat
relevant
a. Bottom mounting(4X)M3 inserts. Max. screw penetration 0.0787(2mm)
s^ba^.Bf^oe^ttot^my^mos^utⁿa^tinn^g(2d^X)a^4mr^md^cs^lear(^he^ol.^eg^{s p}.^lusE²N^key6^wa0^ys.9^(se5^{e k}0^ey)^waa^{y d}r^ee^tailc⁾ omplied
with, in¹¹ _MMr₄₄e_sntuas^trp_wae_shc_ert to creepage and clearance4d.cE.nSisis^duertemainosn^uunlcatitnoe^grsiss(4c,^Xo)rMare3ncitnlyd^sefirtttd^se.dMiis^anxtb.saa^csreen^wunc^pdeee^nrePs^tCraBt^ttiooh^nmr^0a.oi2n3tu^6a(i6ng^msamhfe)tyinsulation.
13. All dimension¹¹ _PMs_la4ssta^picrrⁱⁱⁿⁿe^gsuwlai^atn^sohresi^rhn_eec_t hes (mm)
creepage and clearances.
6. When using this enclosure, ensure that relevant safety standards
(e.g.,EN60950)are complied with, in respect to creepage and clearance
distances, and distances through insulation.