LPX120 Datasheet, PDF (1/2 Pages) Emerson Network Power – Enclosure

Embedded Power for
Business-Critical Continuity
LPX120 Enclosure ^{(2X)M3 INSERT}
Rev. 7.9.09_160
LPX120 Enclosure
 of 2
Installation Notes
0.980 ^L[^P24^X,9 ¹]^{20 • Cover Enclos}0^u.80^r2^{e K}[ⁱ2^t0,4 ]
LPX120 will fit the LPS12X power supplies.
1.457
[ 37,0 ]
2.945
[ 74,8 ]
OUTPUT TERMINALS
INPUT TERMINALS
INSULATOR
4.685 [ 119,0 ]
Materials
1.693
[ 43,0 ]
• 1 Base
(4X)STANDOFF
• 1 Cover
(2X) _•2.677 _{4 M}[ 68,0_3x] _{6mm Pan hea}(2X_d) 0.591
[ 15,0 ]
screws with spring washer
(2X)
•^3.727
4
M^{[ 94,7}3x^] 6mm
ÿ0.35(ÿ8.8)
countersunk
ÿ0.14(ÿ3.6)
screws _{(2X) 2.283 [ 58,0 ]}
Installation Instructions and Notes
0.25(6.4)
• 1 M4 nut
1. Place the insulator over the chassis as shown.
(2X) KEYWAY DETAIL
• 1 M4 star washer
2. Place the power supply over the insulator as shown.
GROUND STUD
A ^{• 1 M4 s}A ^{pring washer}
• 1 Plastic insulator sheet
1.724
[ 43,8
]
2.205
[ 56,0 ]
3. Align the 4x power supply to the chassis standoff.
4. Secure 4 pan head screws with washer provided with in kit as shown.
5. Place the cover over the power supply as shown.
6. Align the 4x cover to the U-bracket countersink holes.
A
A
7. Secure 4 countersink screws provided with in kit as shown.
8. Overall dimensions: 5.95 (151.13) x 3.4 (86.36) x 1.6 (40.64).
(4X)M3 INSERT
MARKED"A"
SEE KEYWAY DETAILS
9. Base plate has two sets of customer mountings:
a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm)
b. Side mounting (4X) M3 inserts. Max. screw penetration 0.236 (6mm)
10. Ensure insulator is correctly fitted in base under PNOCTEBS to maintain safety creepage
and clearances.
MATERIALS
1. All dimensions are in inches(mm)
11.
Ensure
base
is firmly
1 Base
connected
to
supply
earth
v²i^.Oa^vet_4ra.6h^ll8d5e^i(m11ee_9n.s0a^i)oxr^n2st_.9h₄₅₍s₇₄t_.8u_{) x}d_1.69m₃₍₄₃a_.0r₎ ked
12. When using ¹⁴t_MCh^o3vi_Xes_6rme_mn_Pac_{n h}l_eo_ads_su_crer_we_{s w},_ite_{h s}n_pris_ngu_wr_ae_shet_r hat relevant ³s^.aBa.aBsfoeettpoltmaty^emhos^austnthtairnenge(4sdXet)sMa^o3r^ficdnusses^trotsm(.Mee^ramx..g^oscur.^netwiE^npgNes:ne6tra0tio9n 50.0078)7(2amrme) complied
with,
in
respe4 Mc3tX6tmom Ccourneteresupnkascgrewes
1 M4 nut
and
clearance
distan_cbc_..SBe_iodtes^tom,^moa_umnn^otiund^ngtsin(4d^gX(2)i_MXs⁾³⁴t_imna_smen_rctslc^e.Mae^rahxs^o.slect^sreh^pwlur_pseo^2nkeu^etyrag^wtiaoh^yns.0(si_.e2n^e36ks_(e6yu_mwml^aa^{y) d}t^ei^tao^il)n.
13. All dimension^{11 MM}s^{44 ss}a^tparr^rinwe_gawshi_an^esrhei_rnches (mm)
4. Ensure insulator is correctly fitted in base under PCBto maintain safety
creepage and clearances.
1 Plastic insulator sheet
6. When using this enclosure, ensure that relevant safety standards
(e.g.,EN60950)are complied with, in respect to creepage and clearance
distances, and distances through insulation.