|
LPS200-M Datasheet, PDF (1/3 Pages) Emerson Network Power – Medical and ITE safeties | |||
|
Embedded Power for
Business-Critical Continuity
LPS200-M Series
250 Watts
Total Power:
Input Voltage:
# of Outputs:
125 - 250 Watts
90 - 264 Vac
Single
Rev. 1.22.09_#156
LPS200-M Series
of 3
RoHS
Special Features
⢠Medical and ITE safeties
⢠Active power factor correction
⢠3â x 5â footprint
⢠Less than 1U high
⢠EN61000-3-2 compliant
⢠Remote sense
⢠Power fail
⢠Adjustable main output
⢠Built-in Class B EMI filter
⢠Overvoltage protection
⢠Overload protection
⢠Thermal overload protection
⢠Isolated 12V Fan output
⢠LPX80 enclosure available
Safety
⢠TUV 60950, 60601-1
⢠UL
60950, 60601-1
⢠CSA
60950, 60601-1
⢠NEMKO 60950, 60601-1
⢠AUSTEL 60950, 60601-1
⢠CB
Certificate & report
⢠CE
Mark (LVD)
Electrical Specifications
Input
Input raÂnge:
Frequency:
Inrush current:
Efficiency:
EMI/RFI:
Power factor:
Safety ground
leakage current:
90 - 264 Vac; 120 - 300 Vdc
47-63 Hz
50 A max., cold start @ 25 °C
88% typical at full load
FCC Class B conducted; CISPR22 Class B conducted;
EN55022 Class B conducted; VDE0878PT3 Class B conducted
0.99 typical
275 uA @ 50/60 Hz, 264 Vac input
Output
Maximum power:
125 W for convection ; 250 W (200 W for LPS202-M)
with 30CFM forced air
Adjustment range:
Fan output:
±10% minimum on the main outputs
12 V @ 1 A isolated, ±5%
Hold-up time:
16 ms @ 250 W load, 120 Vac input
Overload protection: Short circuit protection on all outputs. Case overload
protected @ 110-160% above rating
Overvoltage protection: 15-35% above nominal output
Logical Control
Power failure:
Open collector logic signal goes high 100-500 msec after main
output; it goes low at least 6 msec before loss of regulation
Remote sense:
Compensates for 0.5 V lead drop min. Will operate without
remote sense connected. Reverse connection protected.
|
▷ |