AD50MEDICAL Datasheet, PDF (1/2 Pages) Emerson Network Power – Universal AC input

Embedded Power for
Business-Critical Continuity
AD50 Medical
Series
50 Watts
Total Power:
Input Voltage:
# of Outputs:
50 Watts
90 - 264 VAC
single
RoHS
Rev. 03.19.08
AD50 Medical Series
1 of 2
Special Features
• Universal AC input
• Fully regulated output
• EN61000-3-2 compliant
• Input power <74 watts
• Overcurrent and overvoltage
protection
• High efficiency
• High MTBF
• IEC320 AC input receptacle
3 pin (type C6) - AD5012N3LM
2 pin (type C8) - AD5012N2LM
• Built in EMI filter
• (CISPR 22 Class B)
• AC input fuse
• Complies with One Watt Input
Energy Star / Blue Angel
Requirement
• CE Mark EMC & LVD
Safety
CSA_UL UL 60601-1
CSA 60601-1
VDE 60601-1
CE Mark LVD and EMC
Electrical Specifications
Input
Input range
90-264 Vac (wide range)
Frequency
47-63 Hz
Inrush current
60A maximum @ 230VAC, cold start 25C°
Input current
2 A maximum
Efficiency
80% typical
EMI/RFI
FCC Part 15, Class B & EN55022 (CISPR 22) Class B
Safety ground
leakage current
300μA maximum@ 50/60 Hz, 264 VAC input - AD5012N3L
100μA maximum@ 50/60 Hz, 264 VAC input - AD5012N2L
Output
Maximum Power (Po)
Hold-up time
50 W
17 ms. minimum at full load @ 100 Vac, 47 Hz
Overvoltage protection
Overcurrent protection
Thermal protection
16 - 20 V
Latching type, recycle AC to reset.
Output short circuit protection auto recover
Overload protection @ 110 - 120% above maximum rating
105° to 120°C Trip point; output will latch off
Cable/connector
DC cable length 2.5 mm center plug
DC plug center +v
DC plug outer -v
Environmental Specifications
Operating temperature: _{5° to +40°C ambient}
Storage temperature:
Electromagnetic
susceptibility:
-40°C to +70°C
Designed to meet EN61000-4-2, -4, -5, level 4;
EN61000-4-3, -6, 10v/m; EN61000-4-8, -11; EN61000-3-3
and EN61000-3-2 Class A
Humidity:
Operating; non-condensing 10% to 90% RH
MTBF demonstrated: >300,000 hours at full load and 25°C ambient conditions