142-0693-051 Datasheet, PDF (1/3 Pages) Emerson Network Power – SMA 50 Ohm Straight Solder Type Plug - with contact, thread-on nut

SMA 50 Ohm
Straight Solder Type Plug -
with contact, thread-on nut
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
CABLE TYPE
.086
Semi-Rigid
VSWR & FREQ. RANGE
1.07 + .008 f (0-18 GHz)
1.35 Max (18-26.5 GHz)
GOLD PLATED NICKEL PLATED
“A”
142-0693-051 142-0693-056 .405 (10.29)
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick cen-
ter conductor. Slide coupling nut onto cable as
shown.
3. Place center contact on center conductor making
sure contact bottoms against cable insulation. Sol-
der center conductor to center contact through sol-
der hole. Solder must not be allowed to run on
outside of contact. Use a minimum amount of sol-
der for a good joint. .020 (0.51) diameter solder is
recommended. Trim excess insulation.
4. Insert contact and cable into body making sure cable
is bottomed against insulator in body. Solder body
to cable. Use a minimum amount of heat to mini-
mize cable insulation movement.
5. Thread coupling nut over body.
CABLE GROUP
RG-405/u
(.086 semi-rigid)
PART NUMBER
142-0693-051
142-0693-056
“A”
.070 (1.78)
.070 (1.78)
Emerson Network Power Connectivity Solutions
299 Johnson Avenue SW, Waseca, MN 56093 • 800 -247- 8256 • [phone] • www.EmersonConnectivity.com