6000-0D01-11001_13 Datasheet, PDF (7/7 Pages) Emcore Corporation – Medallion 6000 Series 1550 nm Externally-Modulated Transmitter

Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
Model Number Information (note 3)
□ 6000 – □ □
FIBER OPTICS
□-□ □□□□
Logo &
Customer
Specific
0–
EMCORE
Logo
Link type
D – 40 km
1 – no Logo S – 65 km
Pout (dBm min) ^{Note 1}
0 – for D, and F-Types
A – 7.0/7.0 for S-Type
B – 8.0/8.0 for S-Type
Loading Type
1 – NTSC (80-ch)
2 – PAL
(60-ch)
3 – NTSC (110-ch)
Optics
1 – SC/APC, Rear
2 – FC/APC, Rear
3 – E2000/APC,
Rear
RF
1 – RF
IN Rear,
TP Front
2 – RF
IN Front,
TP Front
3 – RF
IN Front,
TP Rear
Wavelength
(nm)
00 –1555+/-
5.0nm
01 – 1550+/-
5.0nm
xx – ITU
Channel +/-
0.1nm ^{Note 2}
Power Supply
1 – AC primary,
no secondary
2 – DC primary,
no secondary
3 – AC primary,
AC secondary
F – FTTx
SBS 20 dBm
C – 10.0 for S-Type
4 – PAL (89-ch)
4 – SC/APC,
Front
4 – RF
IN Rear,
TP Rear
4 – AC primary,
DC secondary
L – 25 km
D- 10/10 for S & L-Type
Note 4
5 – Not Used
5 – FC/APC, Front
5 – DC primary,
DC secondary
N – 40 km
E – 8.5/8.5 for L Type
6 – CENELEC (42-
ch)
Note 5
6 – E2000/APC,
Front
Note 1: Options available for Indicated Types only.
Note 2: ITU grid wavelengths can be specified from channel 18 to 40.
Note 3: Not all configurations are available, contact factory.
Note 4: Available for S and L Links. CSO port 2 degraded by 1dB for Channel Loads 1 and 2, CSO port 2 degraded by 2 dB for Channel
Loads 3 and 4.
Note 5: Contact Factory for Model type availability
Additional Kits
G3708-006-001 - Replaceable AC power supply modules
G3708-005-001 - Replaceable DC power supply modules
G7914-076-001 - Replaceable Blank power module plate
G3906-008-001 - Replaceable fans
| REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.