3998-0D01-11001 Datasheet, PDF (7/7 Pages) Emcore Corporation – 3998 Series 1550 nm Externally-Modulated Transmitter

3998 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
Model Number Information (note 3)
□ 3998 – □ □
FIBER OPTICS
□-□ □□□□
Logo &
Customer
Specific
0 – EMCORE
Logo
Link type
D – 40 km
1 – no Logo
S – 65 km
F – FTTx SBS
20 dBm
L – 25 km
N – 40 km
Pout (dBm min)
Note 1
Loading Type
0 – for D and F-Types 1 – NTSC (80-ch)
A – 7.0/7.0 for S-Type
2 – PAL
(60-ch)
B – 8.0/8.0 for S-Type
3 – NTSC (110-
ch)
C – 10.0 for S-Type
4 – PAL
(89-ch)
D- 10/10 for S & L-
Type^Note4
E – 8.5/8.5 for L-Type
5 – Not Used
6 – CENELEC
(42-ch)
Note 5
Optics
1 – SC/APC,
Rear
2 – FC/APC,
Rear
3–
E2000/APC,
Rear
4 – SC/APC,
Front
5 – FC/APC,
Front
6 -E2000/APC,
Front
RF
1 – RF IN
Rear, TP
Front
2 – RF IN
Front, TP
Front
3 – RF IN
Front, TP
Rear
4 – RF IN
Rear, TP
Rear
Wavelength
(nm)
00 –1555+/-
5.0nm
01 – 1550+/-
5.0nm
xx – ITU
Channel +/-
0.1nm ^{Note 2}
Power Supply
1 – AC primary,
no secondary
2 – DC primary,
no secondary
3 – AC primary,
AC secondary
4 – AC primary,
DC secondary
5 – DC primary,
DC secondary
Note 1: Options available for Indicated Types only.
Note 2: ITU grid wavelengths can be specified from channel 18 to 40.
Note 3: Not all configurations are available, contact factory.
Note 4: Available for S and L Links. CSO port 2 degraded by 1dB for Channel Loads 1 and 2, CSO port 2 degraded by 2dB for Channel
Loads 3 and 4.
Note 5: Contact Factory for Model type availability.
Additional Kits
G3708-006-001 – Replaceable AC power supply modules
G3708-005-001 – Replaceable DC power supply modules
G7914-076-001 – Replaceable Blank power module plate
G3906-008-001 – Replaceable fans
| REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.