7200-00-1632-11135 Datasheet, PDF (5/6 Pages) Emcore Corporation – Low Noise Figure for CATV

Medallion 7200 Series CATV Fiber Amplifier
Erbium/Ytterbium Doped Fiber Amplifier (EYDFA)
DATASHEET | APRIL 2016
FIBER OPTICS
European Union “RoHS Directive” Compliance
Except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous
materials contained in the product contain less than the maximum concentration levels for lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers permitted under the European Union
Directive 2011/65/EU (the "RoHS Directive").
Model Number Information
7200-□□-□□□□-□□□□□
Logo &
Customer
Specific
0= EMCORE
Logo
Integrated
WDM
0 = Integrated
WDM
1=No Logo
1 = No
Integrated
WDM
Output Power
per Port
Number of
Ports
XX = xx dBm/port
(Maximum: xx=21
dBm)
01 = 1 port
02 = 2 ports
04 = 4 ports
08 = 8 ports
16 = 16 ports
20 = 20 ports
32 = 32 ports
64 = 64 ports
Optics
1 = SC/APC
2 = FC/APC
3 = E2000
Optical
Input
1 = Front
2 = Rear
Optical
Output
Optical
Monitor
1= Front 1= Front
2= Rear 2= Rear
3 = None
Power
Supply
1= AC primary,
no secondary
2=DC primary,
no secondary
3=AC primary,
AC secondary
4 = SC/APC
Angled
5= FC/APC
Angled
4=AC primary,
DC secondary
5=DC primary,
DC secondary
6= E2000
Angled
Note 1: Not all configurations are available; please contact your EMCORE Sales Representative.
e.g. 7200-00-1632-11135 (EYDFA, EMCORE Logo, with Integrated WDM, 32 Ports, 16 dBm/Port, SC/APC, Front
Input/Output, No Optical Monitors, Dual DC)
e.g. 7200-11-1764-11133 (EYDFA, No EMCORE Logo, 64 Ports, 17 dBm/Port, SC/APC, Front Input/Output, No Optical
Monitors, Dual AC)
| REV 2016.04
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.