6000-0D0111001 Datasheet, PDF (5/7 Pages) Emcore Corporation – 1550 nm Externally Modulated Transmitter

Medallion 6000 Series 1550 nm
Externally Modulated Transmitter
DATASHEET | DECEMBER 2011
General and Mechanical Specifications (continued)
Property
Front Panel RF Gain / OMI
Adjustment Range
CATV Frequency Range
CATV Flatness
CATV Flatness – N-Type
CATV Input impedance
CATV Input Return Loss
CATV Front Panel RF Tap
CATV Front Panel RF Tap Flatness
Requirement
+2 / -4 dB from nominal setting
45MHz – 1003 MHz
+/- 0.50 dB
+/- 0.75 dB
+/- 0.75 dB
75
16dB min
-20 +/- 1 dB down from RF input
+/- 1 dB
SAT-IF Frequency Range
SAT-IF Flatness
SAT-IF Input impedance
SAT-IF Input Return Loss
SAT-IF Front Panel RF Tap
SAT-IF Front Panel RF Tap Flatness
950MHz – 2800 MHz
+/- 2 dB
75
10dB min
7 +/- 2.5 dBmV/Ch at 1% OMI/ch
+/- 1 dB
FIBER OPTICS
Comments
CATV Performance can vary slightly
45MHz - 550MHz
45MHz – 1003 MHz
45MHz – 1003 MHz N-Type
45MHz – 1003 MHz
45MHz – 1003 MHz
950MHz – 2800 MHz
950MHz – 2800 MHz
Test/Link Configuration
L-Type
D-Type
S-Type
H-Type
F-Type
N-Type
Property
15 dBm
None
16 dBm
18 dBm
21 dBm
13 dBm
EDFA
25 Km
40 Km
65 Km
80 Km
20 Km
40 Km
Link¹
Received Power²
0.0 dBm at the receiver
0.0 dBm at the receiver
0.0 dBm at the receiver
0.0 dBm at the receiver
-5.5 dBm at the receiver
0.0 dBm at the receiver
| REV 2011.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.