OTS-2R Datasheet, PDF (3/7 Pages) Emcore Corporation – Optiva OTS-2 C-Band RF Fiber Optic Links

Optiva OTS-2 C-Band
RF Fiber Optic Links
DATASHEET | OCTOBER 2013
Transmitter & Receiver Optical Characteristics
Parameter
Symbol
Condition
Min
Typical
Max
Units
Wavelength
Optical Output Power
l
-
1530
1550
1562
nm
PL
-
9
10
11
dBmo
Connector Return Loss
-
-
40
-
-
dB
Optical Connector Type
-
SC/APC
-
-
-
-
Receiver Optical Input Power
Pin
-
-
-
+10
dBmo
Receiver Responsivity
-
-
0.7
-
-
A/W
Note: In order to prevent reflection-induced distortion degradation, the laser should be connected to an optical cable having a return loss of at least 55 dB for discrete reflections
and 30 dB for distributed reflections.
C-Band Transmitter & Receiver RF Characteristics
Parameter
Condition
Min
Typical
Max
Units
Operational Bandwidth
RF Input Impedance
-
3.400
-
4.200
GHz
5.850
-
6.725
GHz
-
-
50
-
Ω
RF Return Loss
-
-
-
-15
dB
RF Connectors
SMA Female
RF Test Point Reference Value, Relative to RF input or RF output*
-
-18
-20
-22
dB
*Test point performance beyond the stated frequency range is provided; only the test point reference value tolerance may increase beyond the above stated +/- 1 dB
SATCOM
DC Power Consumption - Max
Module Type
Transmitter
Receiver
Input Voltage (VDC)
+12
+12
Max Current (@+70°C)
1A
750 mA
Network Management
All modules are compliant with SNMP v.1 supported through the Optiva NMS card (OPV-CTLR-IC)
© 2013 EMCORE Corporation | REV 2013.10
[phone]
[e-mail]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.