6000-0JE1 Datasheet, PDF (3/5 Pages) Emcore Corporation – Single or Dual Optical Outputs

J-Type Medallion 6000 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
Electrical Specifications
Property
CATV Nominal Input Power
CATV Composite Level
CATV Input Range
CATV RF Gain / OMI Adjustment Range
CATV Frequency Range
CATV Flatness
CATV Input impedance
CATV Input Return Loss
CATV Front Panel RF Tap
CATV Front Panel RF Tap Flatness
SAT Nominal Input Power
SAT Input Range
SAT Composite Level
SAT-IF RF Gain / OMI Adjustment Range
SAT-IF Frequency Range
SAT-IF Flatness
SAT-IF Input impedance
SAT-IF Input Return Loss
SAT-IF Front Panel RF Tap
SAT-IF Front Panel RF Tap Flatness
Requirement
23 dBmV/ch (84 dBuV/ch)
18 dBmV/ch (78 dBuV/ch)
19 dBmV/ch (79 dBuV/ch)
-11.7 dBm
+2/-8 dB from nominal input
+2/-8 dB from nominal setting
45 MHz – 1003 MHz
+/- 0.50 dB
+/- 0.75 dB
75Ω
16 dB min
-20 +/- 1 dB down from RF input
+/- 1 dB
27 dBmV/ch (87 dBuV/ch)
22 – 32 dBmV/ch (82 – 92 dBuV/ch)
-6.2 dBm
+5 / -5 dB from nominal setting
950 MHz – 2800 MHz
+/- 2 dB
75Ω
10 dB min
7 +/- 2.5 dBmV/Ch at Nominal OMI/ch
+/- 1 dB
FIBER OPTICS
Comments
20 NTSC channels + 60 QAM at -10 dB
80 NTSC channels
60 PAL channels
0 dB on FP Display (All Channel Plans)
Optimal performance at nominal input
CATV Performance may vary slightly over
range
45 MHz – 550 MHz
45 MHz – 1003 MHz
45 MHz – 1003 MHz
45 MHz – 1003 MHz
36 QPSK SAT-IF channels
Optimum performance at nominal input
0 dB on FP Display
CATV Performance can vary slightly
950 MHz – 2800 MHz
950 MHz – 2800 MHz
General and Mechanical Specifications
Property
Requirement
Wavelength
1555+/-5 nm
Channel Plan
Optical Connector
Monitoring Interfaces
Operating Temperature
Storage Temperature
Power Consumption
Various – See Specification Tables
SC/APC
100 Base-T Ethernet (SNMP)
Rear Panel RS-232 interface
VFD Screen Front Panel Controls
0°C to 50°C
-20°C to 70°C
65 W max
Comments
Various Options + ITU-grid available – see
Model Number Information
Other styles available
VFD- (Vacuum Fluorescent Display)
| REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.