8000-U Datasheet, PDF (2/8 Pages) Emcore Corporation – Medallion 8000 Series 1550 nm Directly-Modulated Transmitter

Medallion 8000 Series 1550 nm
Directly-Modulated Transmitter
DATASHEET | MAY 2013
FIBER OPTICS
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute
stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those
given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can
adversely affect device reliability.
Parameter
Storage Temperature (power off)
75ohm CATV RF Input Level
Symbol
Min
T_stg
-40
-
Manual Mode
-
-
AGC Mode
-
Max
85
-10
-5
Unit
°C
dBm
L-Band RF Input Level
AC Input Range
AC Input Frequency Range
Power Consumption
-
-
V_AC
90
f_AC
50
P
-
+5
dBm
265
V_AC
60
Hz
50
W
Optical Characteristics
Parameter
Condition
Min
Typ
Max
Unit
Optical Output Power
8000 with selectable fiber length (8000-U-SEL)
10
-
8000 with fixed fiber length option
7
-
-
dBm
-
SBS Threshold
8000 with fixed fiber length option
-
-
8000 with selectable fiber length option (8000-U-SEL)
-
-
18
dBm
20
dBm
Wavelength
-
ITU Channel
nm
Side Mode Suppression Ratio
-
30
-
-
dB
Optical Return Loss¹
APC style connector
40
-
-
dB
1. In order to prevent reflection-induced distortion, the laser must be connected to an optical cable having a return loss of at least
55 dB for discrete reflections and 30 dB for distributed reflections.
| REV 2013.05
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.