5100 Datasheet, PDF (2/5 Pages) Bi technologies – 7/8 Diameter Single Turn Wirewound Precision Potentiometer

5100 Series
L-Band Fiber Optic Links
DATASHEET | OCTOBER 2012
SATCOM
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings
only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operation-
al sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.
Parameter
Operating Temperature Range
Flange-mount
Rack-mount
Storage Temperature
Flange-mount
Rack-mount
DC Voltage
DC Current (Transmitter)
DC Current (Receiver)
Symbol Condition
T_OP
-
T_STG
-
-
-
-
+8VDC
-
+8 VDC
Min Max Units
-40 +65 ˚C
0 +50 ˚C
-40 +85 ˚C
-40 +85 ˚C
-
24 VDC
250 -
mA
200 -
mA
Electrical / Optical Characteristics
Parameter
Symbol
Condition
Min Type
Wavelength (Transmitter)
-
-
1290 -
Optical Output Power (Transmitter) -
-
-
1
dc Responsivity (Receiver)
-
-
0.75
-
Fiber
-
Corning SMF-28 or
equivalent
-
-
Connector
FC/APC Tight Fit,
-
-
-
(Seikoh Giken or equivalent)
Max
1340
-
-
-
-
Units
nm
mW
A/W
-
-
Connector Return Loss
-
-
60
-
-
dB
Link Characteristics, 1 dB Optical
Parameter
Link Gain
50 Ohm (At 25° C), min.
75 Ohm (At 25° C), min.
Amplitude flatness
any 500 MHz
any 40 MHz
Gain vs. temp. (typ.)
L-Band Performance
-
Std.
Low
High
- -4.00 dB -15.00 dB +13.00 dB
- -4.00 dB -15.00 dB +13.00 dB
± 1.50 dB
± 0.35 dB
-
± 0.75 dB
0.03 dB/°C
RF Characteristics, Tx
Parameter
Tx Gain Option
Tx Gain (TG) - 50 Ohm
Tx Gain (TG) - 75 Ohm
Noise figure, max
Input IP3, min.
Input 1 dB compression,
typical
Gain vs. temp. (typ.)
Max RF input (Tx)
Amplitude flatness
any 500 MHz
any 40 MHz
VSWR
Input Impedance
-
-
-
-
-20° C
-40° C
–20° C
-40° C
-
-
Performance
Std.
-002 (high)
-19.50 dB -2.50 dB
-17.75 dB -0.75 dB
45 dB
28 dB
+7.5 dBm
+4.5 dBm
-9.5 dBm
-12.5 dBm
≥ 0 dBm
≥ -3 dBm
≥ -17 dBm
≥ -20 dBm
0.09 dB/°C 0.12 dB/°C
+3 dBm
-14 dBm
± 0.75 dB
± 0.20 dB
Input
2.0:1
-
75 Ohm F, (50 Ohm SMA,
option –001)
RF Characteristics, Rx
Parameter
Rx gain option
Rx Gain (RG) - 50Ohm
Rx Gain (RG) - 75 Ohm
Gain vs. temp. (typ.)
Amplitude flatness
any 500 MHz
any 40 MHz
VSWR
Output Impedance
Performance
-
Std.
-002 (low)
-
+21.00 dB +4.00 dB
-
+19.25 dB +2.25 dB
-
0.06 dB/°C 0.03 dB/°C
Output
-
± 0.75 dB
± 0.15 dB
1.8:1
75 Ohm F, (50 Ohm SMA,
option –001)
© 2012 EMCORE Corporation | REV 2012.10
626-293-3400
[e-mail]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.