SIRU2300-XZ Datasheet, PDF (1/3 Pages) Emcore Corporation – Small Integrated Receiver Unit

Applications
Cellular and PCS Antenna-
Remoting
Microwave Delay-Lines
Frequency Distribution
Systems
Radar System Calibration
Phased Array Antenna
Systems
Features
Wavelength-specific
operation for multi-channel
DWDM systems
Integrates a high frequency
photodiode and bias
circuitry into a
connectorized package
Integrated optical filter to
provide high channel
isolation for DWDM
systems
0.05 – 1 GHz bandwidth
Photocurrent monitoring
circuit
Ruggedized for operation in
military or other harsh
environments
DATA SHEET – SEPTEMBER 2010
Small Integrated Receiver Unit
SIRU2300-XZ
0.05 – 1 GHz
The Emcore Small Integrated Receiver Unit (SIRU2300) is a high-performance
optical receiver with guaranteed performance over the 50 MHz to 1 GHz
frequency band. The SIRU2300-XZ is a fully integrated unit that contains the
high frequency photodiode, RF amplifier and the control electronics. Only DC
input voltages and the optical input signal are required for operation.
The unit contains an internal ITU wavelength optical filter to provide high
isolation for multi-channel DWDM systems.
The unit can be used to construct transparent optical links for antenna
remoting, microwave delay lines and other applications where it is necessary to
transport RF and microwave signals over long distances without signal
degradation.
The SIRU2300-XZ is an ideal receiver to use with Emcore’s high-performance
directly modulated SITU2400-XZ fiber optic transmitters.
Specifications
Electrical
Frequency Range
Electrical Power Requirements
Photodiode Monitor Output
RF Connector
RF Output Impedance
RF Return Loss
0.05 to 1 GHz
+15 V @ 60 mA max
1 V/mA
SMA (female)
50 Ω
9 dB
Optical
Wavelength
Connector
Optical Output Power
Responsivity at DC at 1550 nm
1527.99 -1563.05 nm, ITU specific
FC/APC
+ 3 dBm maximum
> 0.8 A/W
Physical
Dimensions
Operating/Storage Temperature
1.0” H x 3.0” W x 4.0” D
-20 °C to +70 °C
For more information on this and other products:
Contact Sales at Emcore 626-293-3400, or visit www.emcore.com.