PONA30 Datasheet, PDF (1/5 Pages) Emcore Corporation – Erbium Doped Fiber Amplifier

PRELIMINARY DATA SHEET | MARCH 21, 2008
Applications
• High Performance Supertrunking Links
• High Power Distribution Networks
• Fiber Deep Architectures
• FTTx Networks
PONA 3000 Series Erbium Doped Fiber Amplifier
Features
• Full Function High Power Fiber Optic
Amplifier Ready for Integration
• Low Noise Figure (Typ < 6 dB)
• Total Input Power Range: –10 dBm to
+12 dBm
• Total Output Power: +27 dBm to
+35 dBm (Optical Output Power
Splitter is Optional For These Units)
• Standard RS-232 Communications
• Low Electrical Power Consumption
• Input / Output Isolation > 40/40 dB
• Polarization Dependant Gain < 0.1 dB
• Polarization Mode Dispersion < 0.5 ps
The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an
ideal building block for OEM system integrators. The family of PONA
3000 Optical Amplifiers is designed to meet the most demanding noise
performance requirements of CATV and FTTx applications, and
performs all the functions required of an optical amplifier for system
integration. Packaged in a convenient 2RU housing, the PONA 3000
series optical amplifiers provide optical isolation on the input and output
of the gain block for stable, low noise operation. The input and output
optical signal power levels are detected for monitoring and control. The
input optical signal is amplified with active gain control for a constant
output power level, or with active output power control for constant gain
mode. The PONA 3000 series optical amplifiers also provide
monitoring functions and associated alarms for all vital characteristics.
The optical output of the PONA 3000 series optical amplifiers can be
split into number of ports by an optional internal splitter.
PONA3000 series includes AC/DC power supply, front panel, optical
splitters, network card and all necessary connectors.
1 of 5
For more information on this and other products:
Contact EMCORE sales at 626-293-3400, or visit www.emcore.com.