PONA-2114-1-AC-SC-PA Datasheet, PDF (1/3 Pages) Emcore Corporation – Full Functionality 1 RU EDFA (pre-Amp)

PONA 2114 PA Series EDFA
Erbium Doped Fiber pre-Amplifier
DATASHEET | DECEMBER 2013
Applications
High-Performance Supertrunking Links
Optical Distribution Networks
Redundant Ring Architectures
FTTx Networks.
Features
Full Functionality 1 RU EDFA (pre-Amp)
Low Noise Figure (Typ < 3.3 dB)
Total Input Power Range:
-45 dBm to 0 dBm
+14 dBm Saturated Output Power (min)
Small Signal Gain 37 dB (min)
Standard RS-232 Communications
(RS-485 or I²C is Optional)
Key Lock Switch
VFD Panel Status Indicator
Low Electrical Power Consumption
Output Isolation >40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
FIBER OPTICS
The EMCORE PONA 2114 PA Series Erbium Doped Fiber pre-Amplifier (EDFA)
is an ideal building block for OEM system integrators. The family of PONA 2114
PA series preamps is designed to meet the most demanding noise performance
requirements of any fiber link application, and perform all the functions required
of an optical pre-Amplifier for system integration. The PONA 2114 PA series
provides optical isolation on the output of the gain block for stable, low noise
operation. The output optical signal power levels are detected for monitoring and
control. The PONA 2114 PA series also provides monitors and associated
alarms for all vital characteristics. The relay outputs of the PONA 2114 PA series
provide electrical monitoring of alarm conditioning of the unit.
General and Mechanical Specifications
Property
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
Optical Connectors
Dimensions in Inches
Requirement
1530 – 1562 nm
0C to 50C
-40C to 85C
20% to 85%
85 VAC to 265 VAC 50/60 Hz
-36 to -60 V DC
SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC
19.0”W x 14.76”D x 1.72”H
Comments
Standard
Standard
Non-condensing
Standard
Optional
User Specified
19” Rack-Mounted, 1U
| REV 2013.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.