OTP-2HDP Datasheet, PDF (1/2 Pages) Emcore Corporation – HD-SDI & SD-SDI Video

OTP-2HDp
HD-SDI & SD-SDI Video
Optiva^® SERIES Professional Media Transport
Features
„ Supports two independent uncompressed
3Gb/s HD-SDI signals
„ SMPTE 424M, 292M, 259M Compliant
„ Singlemode options (up to 20 km)
„ Uses all-digital processing for crystal clear
picture with no compression
„ Real-time video transmission for exceptional
quality and resolution
„ Two independent output streams (2 x 2.97
Gb/s) with local loopback for each
„ Receiver contains cable driver and reclocker
per SMPTE 424M
„ Transmitter contains cable driver, adaptive
cable equalizer, and reclocker per SMPTE 424M
Applications
„ Remote OB Van/Truck Video Feeds
„ Broadcast Studio Camera Feeds
„ HD Routing (requires Optilinx Optical Switch)
„ Long-haul Signal Transport
„ Lecture Hall Projector Connectivity
„ Medical / Surgical Room Broadcast
The OTP-2HDp is an excellent choice for transporting SMPTE
424M, 292M or 259M compliant video signals over long or short
distances with a single optical wavelength. Supporting two
independent SMPTE 424 video signals, the system offers the
complete flexibility needed for transporting full uncompressed
(2.97 Gb/s) 1080p HD over optical fiber. Additionally, the
OTP-2HDp is part of the innovative Optiva^® Series Video, Audio and Data
Media Transport System. New signals may be added or fully redundant optical
transport solutions may be developed.
Switching and multicasting 3G-HD signals over optical fiber is quick and simple,
by routing OTP-2HDp links independently through the Optilinx^® Switching
Platform, making this the perfect solution for Broadcast Studio HD Routing and
Switching. The combination of Optiva® and Optilinx^® facilitates flexibility for
choice of video, audio, and data transport. With Optilinx^®, cabling is done once
to create a completely optical transport network. Combined with Optiva^®, the
system is flexible to transmit, switch or convert signals on custom optical mesh
networks.
System Design
Optiva^® insert cards support both 19” rack mount and compact table top or
wall mountable enclosures. The 3RU 19” rack mount enclosure (Model: OT-
CC-16-100) can support up to 16 insert cards. It also supports dual-redundant
hot-swappable power supplies (Model: OT-CC-16-100-RPS) utilizing two PS-100
power supplies or two PS-200 power supplies (Model: OT-CC-16-200-RPS).
Also available in the rackmount form factor is the 4-slot (Model: OT-CC-4-1U)
which houses 4 insert cards in 1RU of rack space. The compact one slot (Model:
OT-DTCR-1) and two slot (Model: OT-DTCR-2) enclosures both use an external
power supply (Model: PS-9012).
Copyright^® 2008 Emcore Corporation
858 450 0143
858 450 0155
[e-mail] www.emcore.com