MTX9509 Datasheet, PDF (1/3 Pages) Emcore Corporation – 12 Channel Parallel Optical TX and RX Modules, 1.25 Gbps per Channel

PRODUCT BRIEFS | APRIL 2006
Applications
Optical backplanes
Ganged serial links
Very Short Reach SONET
Logic-logic data links
Board-to-board and shelf-to-
shelf
Features
Single +3.3V power supply
Power Consumption 1.5 Watts
typ.
100-pin matrix array electrical
connector
MPO Optical connector
CML data path inputs and
outputs, with support for both
AC and DC coupled IO
Zero to 80 ºC case temperature
range
Compliance
Fits in SNAP12 MSA sockets
Eye safety: Class 1M laser
product per EN609825-1 and
FDA/CDRH
Electromagnetic Emissions:
FCC part 15 - Class B
(Residential), EN55022
(Formerly CISPR 22)
Electromagnetic Immunity:
EN61000-4-3, GR-1089-CORE
Section 3.3
MTX9509 and MRX9509
12 Channel Parallel Optical TX and RX Modules,
1.25 Gbps per Channel
The MTX9509 and MRX9509 are cost-effective high-speed
transmitter (TX) and receiver (RX) modules for use as parallel
optical data communication links. The modules perform logic-to-
light and light-to-logic conversions for data transmission over
multi-mode fiber ribbon cable, at a wavelength of 850 nm.
The transmitter module uses a 1x12 oxide-confined VCSEL array.
The receiver uses a high-speed photodiode array.
For optical cable connections, both modules use industry
standard IEC 1754-7 MPO connector receptacles. For electrical
connections, both modules use widely accepted 100 pin matrix-
array connectors.
For more information on this and other products contact Sales at EMCORE 505-559-2600, or visit www.emcore.com.
Copyright EMCORE — EMCORE Confidential