1754C Datasheet, PDF (1/7 Pages) Emcore Corporation – C-Band DWDM DFB Laser Component

1754C C-Band DWDM DFB Laser Component
DATASHEET | JANUARY 2013
Applications
CATV Broadcast Networks
Networks with Limited Fiber
Archtectures Using Separate Optical
Wavelengths to Carry Targeted Services
Features
Standard ITU Grid Wavelengths
Advanced Analog Chip Design
Reduced Equipment Requirements in
the Hub
OC-48 Pin Out
Telcordia Technologies™ 468 Compliant
Wide Temperature Range – Stable Even
in Harsh Environments
RoHS Compliant
FIBER OPTICS
The 1754C laser component is a Dense Wavelength Division Multiplexing
(DWDM) laser for analog CATV applications. It features a distributed-feedback
(DFB) device that has been designed specifically for radio frequency (RF) and
CATV applications. The 1754C laser component has a wide temperature range for
reliable performance in harsh node environments and narrow transmitter designs.
It also features low adiabatic chirp to maximize signal quality in short and long
lengths of fiber. The laser’s excellent inherent linearity minimizes degradation of
the broadcast signals caused by quadrature amplitude modulated (QAM)
channels.
The 1754C is available in all C-band ITU grid wavelengths.
Performance Highlights
Min Typical Max
Units
Available Wavelengths
See page 3
nm
Operating Temperature Range
-40
25
+85
C
Optical Output Power
6 - 16
-
-
mW
Adiabatic Chirp (measured at 500 MHz)
40
-
100
MHz/mA
Composite Second-Order Distortion ( CSO )
-
-
-55
dBc
Composite Triple Beat Distortion ( CTB )
-
-
-64
dBc
Carrier-to-Noise Ratio ( CNR )
52
-
-
dB
Frequency Range
5
-
2700
MHz
RF Return Loss
16
-
-
dB
Noise and distortion performance above assume 79 channel NTSC loading with
no QAM, 0 dBm received optical power. See following pages for complete
specifications and operating/test conditions.
| REV 2013.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.