EM73880 Datasheet, PDF (5/40 Pages) ELAN Microelectronics Corp – 4-BIT MICRO-CONTROLLER FOR LCD PRODUCT

EM73880
4-BIT MICRO-CONTROLLER FOR LCD PRODUCT
Preliminary
LCD display RAM:
Increment
Address
00h~0Fh
10h~1Fh
20h~2Fh
30h~3Fh
40h~4Fh
:
B0h ~ BFh
C0h ~ CFh _{level 0}
D0h ~ DFh _{level 4}
E0h ~ EFh _{level 8}
F0h ~ F3h _{level C}
zero page
LCD display RAM
level 1
level 5
level 9
level 2
level 6
level A
level 3
level 7
level B
RAM address from 20h ~ 3Fh are the LCD display RAM area, the RAM data of this region can't be operated
by instruction LDHL xx and EXHL.
ZERO- PAGE:
From 00h to 0Fh is the location of zero-page . It is used as the pointer in zero -page addressing mode for the
instruction of "STD #k,y; ADD #k,y; CLR y,b; CMP k,y".
PROGRAM EXAMPLE: To wirte immediate data "07h" to address "03h" of RAM and to clear bit 2 of RAM.
STD #07h, 03h ; RAM[03] ← 07h
CLR 0Eh,2 ; RAM[0Eh]₂ ← 0
STACK:
There are 13 - level (maximum) stack for user using for subroutine (including interrupt and CALL). User
can assign any level be the starting stack by giving the level number to stack pointer (SP).
When user using any instruction of CALL or subroutine, before entry the subroutine, the previous PC address
will be saved into stack until return from those subroutines ,the PC value will be restored by the data saved
in stack.
DATA AREA:
Except the special area used by user, the whole RAM can be used as data area for storing and loading general
data.
ADDRESSING MODE
(1) Indirect addressing mode:
Indirect addressing mode indicates the RAM address by specified HL register.
For example: LDAM ; Acc ← RAM[HL]
STAM ; RAM[HL] ← Acc
(2) Direct addressing mode:
Direct addressing mode indicates the RAM address by immediate data.
* This specification are subject to be changed without notice.
11.30.2001 5