EM73469A Datasheet, PDF (1/33 Pages) ELAN Microelectronics Corp – 4-BIT MICRO-CONTROLLER FOR LCD PRODUCT

EM73469A
4-BIT MICRO-CONTROLLER FOR LCD PRODUCT
Preliminary
GENERAL DESCRIPTION
EM73469A is an advanced single chip CMOS 4-bit micro-controller. It contains 4K-byte ROM, 244-nibble RAM,
4-bit ALU, 13-level subroutine nesting, 22-stage time base, two 12-bit timer/counters for the kernel function.
EM73469A also contains 6 interrupt sources, 1 input port, 2 bidirection ports, LCD display (32x4), and one high
speed timer/counter with melody output.
EM73469A has plentiful operating modes (SLOW, IDLE, STOP) intended to reduce the power consumption.
FEATURES
• Operation voltage : 1.2V to 1.8V.
• Clock source
: Dual clock system. Low-frequency oscillator is Crystal or RC oscillator (32K Hz,
connect an external resistor) by mask option and high-frequency oscillator is RC
oscillator (connect an external resistor).
• Instruction set
: 109 powerful instructions.
• Instruction cycle time : Up to 2us for 4 MHz (high speed clock).
122 µs or 244µs by frequency double mask option for 32768 Hz (low speed clock).
• ROM capacity
: 4096 X 8 bits.
• RAM capacity
: 244 X 4 bits.
• Input port
: 1 port (P0). P0(0..3) and IDLE releasing function are available by mask option.
• Bidirection port : 2 ports (P4, P8). P4.0 and SOUND is available by mask option. P4.1 is shared with
HTC external input. P8(0..3) and IDLE releasing function are available by mask
option.
• 12-bit timer/counter : Two 12-bit timer/counters are programmable for timer, event counter and pulse width
measurement.
• High speed timer/counter : One 8-bit high speed timer/counters is programmable for auto load timer, melody
output and pulse width measurement.
• Built-in time base counter : 22 stages.
• Subroutine nesting : Up to 13 levels.
• Interrupt
: External . . . . . 2 input interrupt sources.
Internal . . . . . . 2 Timer overflow interrupts, 1 time base interrupt.
1 high speed timer overflow interrupt.
• LCD driver
: 32 X 4 dots, 1/4, 1/3, 1/2 static six kinds of duty selectable, 1/2 bias, 1/3 bias.
• Power saving function : SLOW, IDLE, STOP operation mode.
• Package type
: Chip form 61 pins.
APPLICATIONS
EM73469A is suitable for application in family applicance, consumer products, hand held games and the toy
controller.
* This specification are subject to be changed without notice.
1.9.2001 1