English
Language : 

MC-45V8AB642KS Datasheet, PDF (6/16 Pages) Elpida Memory – 8M-WORD BY 64-BIT VirtualChannelTM DYNAMIC RAM MODULE (SO DIMM)
MC-45V8AB642KS
DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)
Parameter
Operating current (Prefetch
mode at one bank active)
Operating current (Restore
mode at one bank active)
Precharge standby current
in power down mode
Precharge standby current
in non power down mode
Active standby current in
power down mode
Active standby current in
non power down mode
Operating current
(Burst mode)
Auto Refresh current
Self refresh current
Input leakage current
Output leakage current
High level output voltage
Low level output voltage
Symbol Test condition
ICC1P
tRC ≥ tRC (MIN.)
Prefetch is executed one time during tRC.
ICC1R tRC ≥ tRC (MIN.)
Grade
-A75
MIN.
-A75
ICC2P CKE ≤ VIL (MAX.), tCK = 15 ns
ICC2PS CKE ≤ VIL (MAX.), tCK = ∞
ICC2N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),
Input signals are changed one time during 30 ns.
ICC2NS CKE ≥ VIH (MIN.), tCK = ∞ , Input signals are stable.
ICC3P CKE ≤ VIL (MAX.), tCK = 15 ns
ICC3PS CKE ≤ VIL (MAX.), tCK = ∞
ICC3N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),
Input signals are changed one time during 30 ns.
ICC3NS CKE ≥ VIH (MIN.), tCK = ∞, Input signals are stable.
ICC4 tCK ≥ tCK (MIN.), IO = 0 mA
-A75
Background : precharge standby
ICC5
tRCF ≥ tRCF (MIN.)
-A75
ICC6 CKE ≤ 0.2 V
-A75
II (L) VI = 0 to 3.6 V, All other pins not under test = 0 V
IO (L) DOUT is disabled, VO = 0 to 3.6 V
VOH IO = – 4.0 mA
VOL IO = + 4.0 mA
–4
–1.5
2.4
MAX.
600
Unit Notes
mA 1
600 mA 1
4.8 mA
4.8
80 mA
40
24 mA
24
120 mA
80
300 mA 2
920 mA 3
8
mA
+4
µA
+1.5 µA
V
0.4
V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
'DWD 6KHHW E0028N11