MC-45V16AD642KS Datasheet, PDF (6/16 Pages) Elpida Memory – 16M-WORD BY 64-BIT VirtualChannelTM DYNAMIC RAM MODULE (SO DIMM)

MC-45V16AD642KS
DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)
Parameter
Symbol
Test condition
Grade MIN. MAX. Unit Notes
Operating current (Prefetch
mode at one bank active)
Operating current (Restore
mode at one bank active)
Precharge standby current
in power down mode
Precharge standby current
in non power down mode
ICC1P
ICC1R
tRC ≥ tRC (MIN.)
Prefetch is executed one time during tRC.
tRC ≥ tRC (MIN.)
-A75
-A75
ICC2P CKE ≤ VIL (MAX.), tCK = 15 ns
ICC2PS CKE ≤ VIL (MAX.), tCK = ∞
ICC2N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),
Input signals are changed one time during 30 ns.
720 mA 1
720 mA 1
9.6 mA
9.6
160 mA
Active standby current in
power down mode
Active standby current in
non power down mode
Operating current
(Burst mode)
Auto Refresh current
Self refresh current
Input leakage current
Output leakage current
High level output voltage
Low level output voltage
ICC2NS CKE ≥ VIH (MIN.), tCK = ∞ , Input signals are stable.
80
ICC3P CKE ≤ VIL (MAX.), tCK = 15 ns
48 mA
ICC3PS CKE ≤ VIL (MAX.), tCK = ∞
48
ICC3N CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),
240 mA
Input signals are changed one time during 30 ns.
ICC3NS CKE ≥ VIH (MIN.), tCK = ∞, Input signals are stable.
160
ICC4 tCK ≥ tCK (MIN.), IO = 0 mA
-A75
420 mA 2
Background : precharge standby
ICC5
tRCF ≥ tRCF (MIN.)
-A75
1,040 mA 3
ICC6 CKE ≤ 0.2 V
-A75
16 mA
II (L) VI = 0 to 3.6 V, All other pins not under test = 0 V
–8
+8
µA
IO (L) DOUT is disabled, VO = 0 to 3.6 V
–1.5 +1.5 µA
VOH IO = – 4.0 mA
2.4
V
VOL IO = + 4.0 mA
0.4
V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
'DWD 6KHHW (1