EBJ81UG8BAS0 Datasheet, PDF (1/16 Pages) Elpida Memory – 8GB DDR3 SDRAM SO-DIMM

DATA SHEET
8GB DDR3 SDRAM SO-DIMM
EBJ81UG8BAS0 (1024M words × 64 bits, 2 Ranks)
Specifications
• Density: 8GB
• Organization
 1024M words × 64 bits, 2 ranks
• Mounting 16 pieces of 4G bits DDR3 SDRAM sealed
in FBGA
• Package: 204-pin socket type small outline dual in
line memory module (SO-DIMM)
 PCB height: 30.0mm
 Lead pitch: 0.6mm
 Lead-free (RoHS compliant) and Halogen-free
• Power supply: VDD = 1.5V ± 0.075V
• Data rate: 1600Mbps/1333Mbps (max.)
Backward compatible to1066Mbps/800Mbps/667Mbps
• Eight internal banks for concurrent operation
(components)
• Interface: SSTL_15
• Burst lengths (BL): 8 and 4 with Burst Chop (BC)
• /CAS Latency (CL): 5, 6, 7, 8, 9, 10, 11
• /CAS write latency (CWL): 5, 6, 7, 8
• Precharge: auto precharge option for each burst
access
• Refresh: auto-refresh, self-refresh
• Refresh cycles
 Average refresh period
7.8µs at 0°C ≤ TC ≤ +85°C
3.9µs at +85°C < TC ≤ +95°C
• Operating case temperature range
 TC = 0°C to +95°C
Features
• Double-data-rate architecture: two data transfers per
clock cycle
• The high-speed data transfer is realized by the 8 bits
prefetch pipelined architecture
• Bi-directional differential data strobe (DQS and /DQS)
is transmitted/received with data for capturing data at
the receiver
• DQS is edge-aligned with data for READs; center-
aligned with data for WRITEs
• Differential clock inputs (CK and /CK)
• DLL aligns DQ and DQS transitions with CK
transitions
• Commands entered on each positive CK edge; data
and data mask referenced to both edges of DQS
• Data mask (DM) for write data
• Posted /CAS by programmable additive latency for
better command and data bus efficiency
• On-Die-Termination (ODT) for better signal quality
 Synchronous ODT
 Dynamic ODT
 Asynchronous ODT
• Multi Purpose Register (MPR) for pre-defined pattern
read out
• ZQ calibration for DQ drive and ODT
• Programmable Partial Array Self-Refresh (PASR)
• /RESET pin for Power-up sequence and reset
function
• SRT range:
 Normal/extended
• Programmable Output driver impedance control
Document No. E1717E50 (Ver. 5.0)
Date Published May 2011 (K) Japan
Printed in Japan
URL: http://www.elpida.com
Elpida Memory, Inc. 2010-2011